Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

Dead Miss @ 3500 ???

Thread Tools
 
Search this Thread
 
Old 09-02-2008, 04:20 PM
  #1  
Registered User
Thread Starter
 
blackspyder's Avatar
 
Join Date: Aug 2008
Location: Huddleston, VA
Posts: 137
Likes: 0
Received 0 Likes on 0 Posts
Dead Miss @ 3500 ???

The 88 22RE is giving me a hard time currently. When I rev it up it dead misses at 3500RPM and will not go above. going down the road in 4th and 5th gears if I start to pull a hill around 2500 RPM (45 MPH 4th, 60 MPH 5th) it will misfire. I've changed the Distributor Cap, Rotor Button, Plugs, Wires, and fuel filter. Normal thinking would say the Vaccum Advance has gone bad but there is no vaccum advance on the distributor which leads me to believe it may be in the EGR system. I'm jsut curious if anyone else had a similar issue and knew of a possible culprit. I know the Vaccum system leaks like a sive and I'm waiting for the FSM to finish d/l'ing so I can get a good diagram to re plumb it by (the under hood one is too faded to read).
Old 09-02-2008, 06:14 PM
  #2  
Registered User
 
wardriver's Avatar
 
Join Date: Jul 2007
Location: 26.3 road miles from the AT (VA)
Posts: 347
Likes: 0
Received 0 Likes on 0 Posts
Is this a new problem or did it happen after some of your fixes? And yes I would definitely get those vacuum leaks fixed first.

Huddleston eh? Well...you're just down the road.
Old 09-02-2008, 06:19 PM
  #3  
Registered User
 
abecedarian's Avatar
 
Join Date: Mar 2008
Location: Temecula Valley, CA
Posts: 12,723
Likes: 0
Received 4 Likes on 4 Posts
double/triple check your timing first.
make sure that when you insert the jumper in the diagnostic port Te1 and E1 terminals the idle speed noticibly changes. if it doesn't go to TPS check and adjustment.

otherwise, any trouble codes?
Old 09-02-2008, 06:25 PM
  #4  
Registered User
 
rowdy235's Avatar
 
Join Date: Sep 2007
Location: Sweet Home, OR
Posts: 1,803
Likes: 0
Received 1 Like on 1 Post
had that problem with my 77, and it turned out to be the fuel pump.
Old 09-02-2008, 06:35 PM
  #5  
Registered User
 
Spinnbait's Avatar
 
Join Date: Apr 2006
Posts: 355
Likes: 0
Received 0 Likes on 0 Posts
Check the ground from the AFM. You can try grounding the AFM directly. If this solves your problem, you have a bad ground in the ECU and it's time for a new one...
Old 09-05-2008, 12:55 PM
  #6  
Registered User
Thread Starter
 
blackspyder's Avatar
 
Join Date: Aug 2008
Location: Huddleston, VA
Posts: 137
Likes: 0
Received 0 Likes on 0 Posts
Timing was off a little bit, checked, cleaned, and adjusted the TPS. Still doing it. gonna go for the fuel pump this weekend (I was gonna do it anyway)

Trouble Codes: 51

What is the AFM?

If it seems like im not too worried about it its cuz I have an S10 in pieces right now re doing the tranny and its kicking my ---
Old 09-05-2008, 01:17 PM
  #7  
Registered User
 
NwRunner's Avatar
 
Join Date: Feb 2008
Location: Woodinville, Washington
Posts: 453
Likes: 0
Received 0 Likes on 0 Posts
AFM is Air/Fuel managment or something if im not mistaken?

Edit:Ok im an idiot i remembered its AIR FLOW METER

Last edited by NwRunner; 09-05-2008 at 01:21 PM.
Old 09-07-2008, 12:20 PM
  #8  
Registered User
Thread Starter
 
blackspyder's Avatar
 
Join Date: Aug 2008
Location: Huddleston, VA
Posts: 137
Likes: 0
Received 0 Likes on 0 Posts
Found it finally. the Cat or muffler was clogged. didnt check to see which it was but I replaced the muffler and took care of the cat, I'll order a new one next week from Jegs really pleased with the one I put on the S-10 (that and they are cheap)
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Williamemslie
95.5-2004 Tacomas & 96-2002 4Runners
14
10-05-2015 09:28 AM
sanctfy
86-95 Trucks & 4Runners
10
09-13-2015 06:33 PM
noahstancik
86-95 Trucks & 4Runners
18
09-10-2015 10:47 AM
Gone Fission
General Electrical & Lighting Related Topics
4
09-04-2015 12:18 PM
mirabile4runner
Misc Stuff (Vehicle Related)
0
09-03-2015 07:15 AM



Quick Reply: Dead Miss @ 3500 ???



All times are GMT -8. The time now is 10:03 PM.