I have a 86' 4runner and my O/d light is blinking. I know I need to jump out my data link connecto 1, but do not know where it is. Can anyone please point me in that dirrection.

 

wow this looks familar...

https://www.yotatech.com/forums/f116.../#post50965923

Again:

 

I jumped the front one out and nothing happened

 

Did you turn the ignition to on and watch the engine light flash on the dash after you jumped the plug?

 

dont want engine light to flash I want the O/D light to flash

 

http://personal.utulsa.edu/~nathan-b...45diagnosi.pdf Check this out this is what I'm tring to do

 

I found this

https://www.yotatech.com/forums/f116...ng-off-140996/

with this:

http://personal.utulsa.edu/~nathan-b...85diagnosi.pdf

 

atleast it'll show you where the plug is that you need to "short" out. I told you the wrong plug...sorry!!

 

Thanks, No problem I'm going to look now

 

sweet, let us know what you find!

 

good luck finding your problem...
do us all a favor tho, and just tack onto your last thread instead of creating another one... keeps the boards a lil tidier...

 

might aswell keep this thread going for future searchs i haveen came across this issue yet!
next time though as more than one question if you have it per post.. makes it easyier to get help and youll get more response!

 

nevermind.

 

how about following directions, particularly if you don't know what you're doing?
... or at least don't act so 'cocky'.

 

by pulling your codes via check engine light it will tell you the code for your tranny..

there isnt one to do the o/d light!

 

JEL - Did you find the Data Link Connector for the tranny? I found the two round yellow plugs on my 86 by the air box but those look nothing like the connector that the tranny documentation refers to.

Thanks