check to make sure this is my seafoam line?
#1
Registered User
Thread Starter
Join Date: Apr 2007
Location: Valencia, California
Posts: 1,301
Likes: 0
Received 3 Likes
on
3 Posts
check to make sure this is my seafoam line?
just making sure this is it on the 3vze engine. let me know. i think my engine has a little round black thing behind the brake fluid reserve...
the tube that goes in there is the one i pull out?
how can i make sure? does this have suction like the pcv line?
#6
Registered User
Join Date: Sep 2007
Location: Ft.Lauderdale, FL
Posts: 386
Likes: 0
Received 0 Likes
on
0 Posts
yes it should have suction if it doesnt, look for a different line. i just used my pcv line. the idle will drop down quite a bit and it may be useful to have an extra person to give it gas to keep it from dying
#7
Registered User
Join Date: Oct 2007
Location: Mile High
Posts: 253
Likes: 0
Received 0 Likes
on
0 Posts
^^^Yes it sucks (no pun) just put your finger over the end of the bottle and slowly pour about half in.
I had to do mine at night because I live in an apartment complex. Didnt want the neighbors freaking out.
I had to do mine at night because I live in an apartment complex. Didnt want the neighbors freaking out.
Last edited by dirtyXplorer; 11-09-2007 at 08:06 PM.
Trending Topics
#8
Registered User
Thread Starter
Join Date: Apr 2007
Location: Valencia, California
Posts: 1,301
Likes: 0
Received 3 Likes
on
3 Posts
yeah i poured it in and the smoke was HUMUNGUS!
now to wait 30 mins and watch the show.
i poured ALOT in im kinda scared i cannot gauge how much i put in its night time but its freaking awesome!!!
now to wait 30 mins and watch the show.
i poured ALOT in im kinda scared i cannot gauge how much i put in its night time but its freaking awesome!!!
#10
Registered User
Join Date: Nov 2005
Location: NOW, Havasu!
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
#12
Registered User
Join Date: Oct 2006
Location: Midlothian, VA
Posts: 685
Likes: 0
Received 0 Likes
on
0 Posts
#13
Registered User
Thread Starter
Join Date: Apr 2007
Location: Valencia, California
Posts: 1,301
Likes: 0
Received 3 Likes
on
3 Posts
i got mine at pep boys.
okay sorry it was too late to post i was having too much fun last night lol..
i let it sit about 40 minutes... then started it up, puffs of smoke, but nothing too huge... it was only big when i put the stuff in! i did it right didnt i?
i put a bunch in the gastank with only a quarter tank left.
results:
big notice in throttle response!!!
aka VROOOOOOOOOM (low pitch)
better acceleration and overall feel.
it didnt cure my bad sounding engine though.
and no check engine light?
okay sorry it was too late to post i was having too much fun last night lol..
i let it sit about 40 minutes... then started it up, puffs of smoke, but nothing too huge... it was only big when i put the stuff in! i did it right didnt i?
i put a bunch in the gastank with only a quarter tank left.
results:
big notice in throttle response!!!
aka VROOOOOOOOOM (low pitch)
better acceleration and overall feel.
it didnt cure my bad sounding engine though.
and no check engine light?
#15
Registered User
Thread Starter
Join Date: Apr 2007
Location: Valencia, California
Posts: 1,301
Likes: 0
Received 3 Likes
on
3 Posts
well, its hard to guage how much you put in because you cannot see in the can. i say i messed up and put 2/3 of a can in. i was scared at first but now i think everything is cool.
#16
I checked the Toyota Service Manual. It does indeed label that as the "SEAFOAM LINE". Yes, that's the brake booster line (goes into wide black cylinder), one of several lines through which Seafoam can be introduced.
Thread
Thread Starter
Forum
Replies
Last Post
skoti89
Offroad Tech
3
07-08-2015 12:05 AM