Hey Guy's, I just installed a set of Aisin Hub's on my 93 4runner. Im wondering if i cut a hole in the factory wheel center cap's, will they mount on the factory wheel's? Has anyone done this? I just wanted to know before i cut a hole and/or ruin the center wheel cap. Thank's for your help. And have a Great 4th!

 

i would think they would, are the aisins any bigger then the stock ?

 

My 4runner came with the ADD system, so it was just the cap over the wheel. I know the Aisin's are a stock Toyota part, but just dont know if the cap fit's.

 

Just take the caps off XD

 

Yes, It can be done, and if done right (some came from the factory like that) it looks good.

SR5 wheels?

 

Yes, the SR5 Split 4 spoke's.

 

Yep, I have seen a few pictures on here floating around. If I remember correctly the cap has an imprint that you cut out. But I could be wrong on how you cut it...

 

Thank's for the reply's guy's!

 

I just took the caps off, never even occurred to me to try & cut a hole in the center cap & stick it on with the manual hubs. IMO it looks fine with the hubs & no fabbed cap.

 

Jay is right, there is a slight imprint on the back to where you would need to cut the hole to fit the manuals through