I've almost got a remanned 3VZE in my 94 runner and I've hit another snag. 4 of the injector clips are broken and won't lock onto the injectors. Does anyone have clever way to fix this on know where I can get some replacement clips, or am I going to have to make a trip to the dealership?

 

during my overhaul i noticed mine were broken also, i just slid them over and put a little dot of superglue on the end and they havent given me any problems in 3k miles

 

zip ties

 

x2 on the zip ties. It doesnt have to be pretty as long as it works.

 

If its the wire harness part that is broken, try this p/n at a dealership... 90980-11153. That should be a new injector plug.

 

no its the plastic retaining clips holdign the injectors inplace. Mine are ALL broken and have been. I just put em on as though the clip were there and had no issus. I think this time ill put just a smidge of silicon on the plastic to plastic case for piece of mind.

 

That is what I was talking about, the plastic piece on the harness, not the injector....

 

same hear broken connectors on the harness....

i just slipped mine back on... have yet to have an issue...