Looking to add my auxiliary cooler and sensor for a gauge, how do I identify which is the pressure and return line to my radiator? Did a search...

Thanks

 

http://www.txchange.com/cooler.htm

 

You, my friend, are MUCH MAN!

Thanks!!!!

 

I was going to say it's the line on the driver's side of the radiator... but my 91 2wd truck isn't here for me to look at (wife had to work)....
Would I have been correct?

 

I "believe" that's the one, but I have to confirm. Pretty sure your hunch is correct. If you would confirm, Abe, I'd sure appreciate it!!

 

So...
If I confirm your request to confirm my hunch, I've confirmed my own hunch?
Now how is that supposed to be you helping me?
Well, it'll be tomorrow morning before I can confirm your confimation of my hunch.

 

It shan't. Yes, I said "shan't." Means: shall not.

Translation: tell me, it'll be to my own benefit solely.. Sorry... or not.

Thanks Abe...

 

I just put a cooler on mine a few weeks back (that's how I found that cooler line web page) Just follow the rear line on the trans up to the front. That's your return line (I forgot which side it was) Good luck!