95 won't fire up.

Reply Subscribe

Thread Tools

Search this Thread

Jan 6, 2013 | 03:27 PM

#21

dakotawho

Registered User

iTrader: (1)

Joined: Oct 2011

Posts: 599

Likes: 0

From: VA

Use that video on the distributor....its too easy to not check!!!

Jan 6, 2013 | 03:37 PM

#22

Jackedupjoe

Thread Starter

Registered User

Joined: Jan 2013

Posts: 17

Likes: 0

I did try that video and all check good, was a 1 on tdc compression stroke. Two wires were wrong got those fixed and still nothing,

Jan 6, 2013 | 03:45 PM

#23

dakotawho

Registered User

iTrader: (1)

Joined: Oct 2011

Posts: 599

Likes: 0

From: VA

least it rules that out then. 22r or 22re?

Jan 6, 2013 | 03:51 PM

#24

Jackedupjoe

Thread Starter

Registered User

Joined: Jan 2013

Posts: 17

Likes: 0

Yea, good video.

Jan 6, 2013 | 04:11 PM

#25

dakotawho

Registered User

iTrader: (1)

Joined: Oct 2011

Posts: 599

Likes: 0

From: VA

22r or re?

Jan 6, 2013 | 04:14 PM

#26

Jackedupjoe

Thread Starter

Registered User

Joined: Jan 2013

Posts: 17

Likes: 0

Re, I believe.

Jan 6, 2013 | 04:30 PM

#27

dakotawho

Registered User

iTrader: (1)

Joined: Oct 2011

Posts: 599

Likes: 0

From: VA

You checked all your fuses? I had a re blow the ign fuse under the hood, kept blowing it because the wire was grounded out....Any way you can get a pic of the motor.

Jan 6, 2013 | 04:42 PM

#28

Jackedupjoe

Thread Starter

Registered User

Joined: Jan 2013

Posts: 17

Likes: 0

Yea checked fuses all good, will get pic during week if I can.

Jan 6, 2013 | 04:44 PM

#29

Jackedupjoe

Thread Starter

Registered User

Joined: Jan 2013

Posts: 17

Likes: 0

It at one point sputtered for a few seconds on its own. But nothing more.

Jan 6, 2013 | 04:46 PM

#30

dakotawho

Registered User

iTrader: (1)

Joined: Oct 2011

Posts: 599

Likes: 0

From: VA

hmmm....Check all the wiring inside, make sure it's all taped/covered like it should be....anything could be grounding it, i wish i was a little more help.