92 runner motor swap. Please help!!!
#1
92 runner motor swap. Please help!!!
Ok, so I searched and was unsure of the answers presented and would like just a little advice on this as this is the only thing left for this motor swap. I have a 92 4runner 3vze, I swapped the motor with a 91 3vze. I am using the 92 wiring harness and everything I have figured out except the distributor. I have been trying to google the answers and checked on here and cant seem to find right answer. Can I use the 92 distributor in my 91 motor. They are different the 91 has a much longer shaft and if not, can I just swap wires and it would be ok? I have heard of issues with start up and dont want to cut the dizzy wires without knowing for sure if I even have to. I am so close and just want to finish this part to start it up. any help please!! Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacNorWest]: T100 auto trans/tcase - Bay area, CA
94whiterunner
Engines - Transmissions
2
09-22-2015 07:25 PM
Vargntucson
95.5-2004 Tacomas & 96-2002 4Runners
0
07-04-2015 12:15 PM