7.5 front diff dis-assembly
Jul 29, 2008 | 10:43 AM
#1
Thread Starter
Registered User
Joined: Aug 2007
Posts: 429
Likes: 1
From: Audubon NJ
7.5 front diff dis-assembly
Is there a diagram or walk through anywhere on the dis-assembly of the 7.5 front diff? I want to rebuild mine since the stub shaft has alot of play but i cant seem to find a diagram anywhere
Jul 29, 2008 | 02:30 PM
#3
Registered User
Joined: Mar 2008
Posts: 4,371
Likes: 6
From: Texas
Try Zuks site. It might be in here. http://www.gearinstalls.com/
Jul 30, 2008 | 05:02 AM
#6
Registered User
Joined: Jul 2008
Posts: 151
Likes: 0
From: Texas
I just did mine to put some 5.29's in. Zuk was here helping me through it. If you get all the right parts to begin with, it's very doable. You need a press, a dial indicator with a magnetic base, an inch pound torque wrench and you have to make something to hold the pinion flange while you tighten the pinion nut. Make it long, it takes a LOT of torque to crush the crush sleeve.
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: Wanted: 4.88 front diff, rear 8'' 4.88
jaretstuff
Axles - Suspensions - Tires - Wheels
1
Aug 4, 2015 02:08 PM
yourrealdad
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 29, 2015 11:08 AM
Steven.m.paulk
86-95 Trucks & 4Runners (Build-Up Section)
3
Jul 24, 2015 01:44 PM
scottyg486
Offroad Tech
3
Jul 19, 2015 05:34 PM
TokyoD23
95.5-2004 Tacomas & 96-2002 4Runners
4
Jul 12, 2015 06:01 AM
