Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

3vze problems

Old Nov 15, 2012 | 11:51 AM
  #1  
harleymisener93's Avatar
Thread Starter
Registered User
 
Joined: May 2012
Posts: 10
Likes: 0
From: california
3vze problems

Hey guys I went out to start up my 4runner today and it wouldn't fire up, when I cranked it over it start to fire up then die. I held down the gas and tryed starting it and it started up but it wasn't happy about it, I popped the hood while it struggled to idle and I noticed the engine would kinda surge and then idle and surge again. I think it might not be getting good spark cause I pulled of the cap and rotor and both seeemed to have bad wear, the rotor arm has a bend in it and the cap has burns. I could bhe wrong tho a friend said it could be low compresstion
Reply
Old Nov 15, 2012 | 06:34 PM
  #2  
TNRabbit's Avatar
Contributing Member
 
Joined: Apr 2006
Posts: 4,787
Likes: 36
From: TENN Native Languishing in Virginia
Well if the rotor arm is bent & the cap burnt, there's two problems right there.

Have you checked for CEL codes yet?
Reply
Old Nov 15, 2012 | 06:41 PM
  #3  
harleymisener93's Avatar
Thread Starter
Registered User
 
Joined: May 2012
Posts: 10
Likes: 0
From: california
It acually happened to be a bad ignition coil, got it fixed today. Its werid that the coil went out that's rare in vehicles
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
91yotapup
86-95 Trucks & 4Runners
9
Jul 27, 2015 07:19 AM
whereAreMyPants
86-95 Trucks & 4Runners
2
Jul 22, 2015 03:32 AM
88yodabasket
86-95 Trucks & 4Runners
15
Jul 13, 2015 01:32 PM
smiley52
86-95 Trucks & 4Runners
8
Jul 11, 2015 05:16 AM
MTLroadierunner
86-95 Trucks & 4Runners
0
Jul 6, 2015 12:17 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 08:08 AM.