3.0 coolant hose against firewall
Jul 26, 2011 | 10:07 AM
#21
Thread Starter
Registered User
Joined: Nov 2004
Posts: 181
Likes: 0
From: So Cal & Yellowstone
Well, I took the hood off. Its very easy! And that allowed good access.
Once the hood was off I was able to get to the little hose by laying on the engine and going at it with a 45* loooooong needle nose plyers. I replaced the old hose with some I had laying around. So I made an extra long loop so it wouldn't kink.
Runs great now! Thanks again everyone!
Once the hood was off I was able to get to the little hose by laying on the engine and going at it with a 45* loooooong needle nose plyers. I replaced the old hose with some I had laying around. So I made an extra long loop so it wouldn't kink.
Runs great now! Thanks again everyone!
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
Jul 14, 2020 08:35 PM
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 10, 2015 06:21 PM
