Pulling Heater Core
Jan 9, 2018 | 07:09 AM
#1
Thread Starter
Contributing Member
Joined: Oct 2004
Posts: 1,263
Likes: 0
From: JACKSON
Pulling Heater Core
1983 4wd pickup with a 22r.
Considering I'm missing most of my dash anyways, looks like its pretty straightforward. I've looked at the FSM writeup and it it is pretty basic in its steps, any tricks to know going into this? Looks like three bolts holding the heating unit into the firewall, then disconnect the heater hoses and pull it out. I'm guessing I remove the pipe extensions on the core itself after I remove the unit from the truck. Thanks!
Considering I'm missing most of my dash anyways, looks like its pretty straightforward. I've looked at the FSM writeup and it it is pretty basic in its steps, any tricks to know going into this? Looks like three bolts holding the heating unit into the firewall, then disconnect the heater hoses and pull it out. I'm guessing I remove the pipe extensions on the core itself after I remove the unit from the truck. Thanks!
Last edited by GodwinAustin; Jan 9, 2018 at 07:24 AM.
Thread
Thread Starter
Forum
Replies
Last Post
novek
86-95 Trucks & 4Runners
7
Oct 9, 2007 09:16 AM
wifesaysimadumbass
95.5-2004 Tacomas & 96-2002 4Runners
7
Mar 15, 2004 07:52 PM
