High Idle Problem After Carb Rebuild
#1
Registered User
Thread Starter
Join Date: Oct 2008
Location: Colorado
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
High Idle Problem After Carb Rebuild
Hey, team. I've got a 79 Hilux, and I just rebuilt the stock carb because I was getting horrible gas mileage (about 14mpg). Since rebuilding the Carb, the truck idles at about 1600 RPM (it should be idling at 800). If I try to lower the idle by adjusting the Idle Speed Adjusting Screw or the Idle Mixture Adjusting Screw, the truck stalls. I've checked the choke thermostat and the part that forces the choke open and they're both working. Any ideas?
Throttle Linkage?
Idle Stop Solenoid?
Throttle Linkage?
Idle Stop Solenoid?
Last edited by kyle.kimble; 10-26-2008 at 07:14 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM