Pre 84 Trucks 1st gen pickups

1980 longbed lift opinions

Thread Tools
 
Search this Thread
 
Old Nov 23, 2012 | 07:19 AM
  #41  
cman1's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Jul 2010
Posts: 856
Likes: 1
From: greenville,wi
well,first off,i had to look for almost 10 yrs for a truck like this,second its definantly not perfect.got some rust pops coming up on the bed,but for wisconsin,you just dont see em here in the rust belt.i gave $3200 for it and am very content about it!!! and thanks for the comments!!
Reply
Old Nov 23, 2012 | 07:28 AM
  #42  
blake.nemitz's Avatar
Registered User
 
Joined: May 2010
Posts: 1,517
Likes: 3
From: castle rock
as a guy who has done the zuk mod in the past if you have the right coil even under full droop its still under tension due to the shock limiting downtravel. had to remove both shocks and jack the frame way up with the leafs unbolted just to get them in with a coil compressor. was done on an 84 runner with 2" 4runner softride coils. rode great until i got the allpro springs to match the sas. and before anyone says it was sa from the factory it was an 84 body on an 88 pickup frame.

Last edited by blake.nemitz; Nov 23, 2012 at 07:30 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
80Truck
Pre 84 Trucks
9
Oct 12, 2025 07:25 PM
bighaydn
86-95 Trucks & 4Runners
0
Aug 4, 2015 07:17 PM
kirkrunner
86-95 Trucks & 4Runners
2
Jul 27, 2015 07:59 PM
A2theK
86-95 Trucks & 4Runners
5
Jul 12, 2015 10:46 AM
Yotoder865
Tires & Wheels
0
Jul 9, 2015 07:51 PM




All times are GMT -8. The time now is 04:21 PM.