FS[SouthEast]: 85 ExCab EFI semi-built $6000 OBO
#1
Sold sold sold
I bought a side by side a couple months back and my family is growing so my wife says this has to go. I bought the truck about 6 years ago and since then have done a lot of work to the truck. I just finished rebuilding the motor in the truck. The truck has a spare tire carrier gate but I also still have the tailgate. I also have a set of half doors that will go with the truck. they are nice in the summer. I know the truck needs the steering box rebuilt, it leaks pretty good. I have the rebuild kit already just haven't had time to mess with it. I have a 14 month old girl and my wife works nights. This truck is by no means a show truck, it has some rust here and there but overall its not a rust bucket. Im sure im forgetting some stuff. Here is a list of the things I can think of.
Brand new rebuilt engine bored .30 over
Brand new ENGBLDR Street head w/ Oversized Stainless valves and 270 H.O. Cam
LC Engineering Ceramic coated header
LC Engineering adjustable cam gear
Injectors rebuilt by witchhunter
Brand new 5.71 gears with Aussie lockers Front & Rear
High Steer Steering kit
Rear disc brake conversion
IFS Hub swap & IFS rear axle 1.5" extra width
Battery/Intake swap
35x10.50 Super Swamper Boggers
14" Bilstein Shocks
Low Range Offroad Rear shock bar
Trail Gear 14" front shock hoops
U-bolt flip kits
Greasable front shackles
Homemade front bumper w/ Warn xd9000i
Bucket seats and console from a 95 4runner (better side bolsters and adjustable lumbar)
I added power windows, not factory but used factory switches
A set of half doors will also go with the truck.
I have the tailgate and the tire gate. Both will go with the truck.
The
The bad that I can think of:
-The steering box leaks, I have the rebuild kit to go with the truck though.
-The blend switch broke behind the dash. I just manually worked it under the hood.
-The winch needs a solenoid to work
-The truck does have some rust in the body line of the bed, on the drivers door, and on the front drivers fender where I hit a deer but straightened the fender back out.
Brand new rebuilt engine bored .30 over
Brand new ENGBLDR Street head w/ Oversized Stainless valves and 270 H.O. Cam
LC Engineering Ceramic coated header
LC Engineering adjustable cam gear
Injectors rebuilt by witchhunter
Brand new 5.71 gears with Aussie lockers Front & Rear
High Steer Steering kit
Rear disc brake conversion
IFS Hub swap & IFS rear axle 1.5" extra width
Battery/Intake swap
35x10.50 Super Swamper Boggers
14" Bilstein Shocks
Low Range Offroad Rear shock bar
Trail Gear 14" front shock hoops
U-bolt flip kits
Greasable front shackles
Homemade front bumper w/ Warn xd9000i
Bucket seats and console from a 95 4runner (better side bolsters and adjustable lumbar)
I added power windows, not factory but used factory switches
A set of half doors will also go with the truck.
I have the tailgate and the tire gate. Both will go with the truck.
The
The bad that I can think of:
-The steering box leaks, I have the rebuild kit to go with the truck though.
-The blend switch broke behind the dash. I just manually worked it under the hood.
-The winch needs a solenoid to work
-The truck does have some rust in the body line of the bed, on the drivers door, and on the front drivers fender where I hit a deer but straightened the fender back out.
Last edited by BerHntr; Nov 5, 2020 at 04:15 PM.
#6
Is truck for sale??
I bought a side by side a couple months back and my family is growing so my wife says this has to go. I bought the truck about 6 years ago and since then have done a lot of work to the truck. I just finished rebuilding the motor in the truck. The truck has a spare tire carrier gate but I also still have the tailgate. I also have a set of half doors that will go with the truck. they are nice in the summer. I know the truck needs the steering box rebuilt, it leaks pretty good. I have the rebuild kit already just haven't had time to mess with it. I have a 14 month old girl and my wife works nights. This truck is by no means a show truck, it has some rust here and there but overall its not a rust bucket. Im sure im forgetting some stuff. Here is a list of the things I can think of.
Brand new rebuilt engine bored .30 over
Brand new ENGBLDR Street head w/ Oversized Stainless valves and 270 H.O. Cam
LC Engineering Ceramic coated header
LC Engineering adjustable cam gear
Injectors rebuilt by witchhunter
Brand new 5.71 gears with Aussie lockers Front & Rear
High Steer Steering kit
Rear disc brake conversion
IFS Hub swap & IFS rear axle 1.5" extra width
Battery/Intake swap
35x10.50 Super Swamper Boggers
14" Bilstein Shocks
Low Range Offroad Rear shock bar
Trail Gear 14" front shock hoops
U-bolt flip kits
Greasable front shackles
Homemade front bumper w/ Warn xd9000i
Bucket seats and console from a 95 4runner (better side bolsters and adjustable lumbar)
I added power windows, not factory but used factory switches
A set of half doors will also go with the truck.
I have the tailgate and the tire gate. Both will go with the truck.
The
The bad that I can think of:
-The steering box leaks, I have the rebuild kit to go with the truck though.
-The blend switch broke behind the dash. I just manually worked it under the hood.
-The winch needs a solenoid to work
-The truck does have some rust in the body line of the bed, on the drivers door, and on the front drivers fender where I hit a deer but straightened the fender back out.
Brand new rebuilt engine bored .30 over
Brand new ENGBLDR Street head w/ Oversized Stainless valves and 270 H.O. Cam
LC Engineering Ceramic coated header
LC Engineering adjustable cam gear
Injectors rebuilt by witchhunter
Brand new 5.71 gears with Aussie lockers Front & Rear
High Steer Steering kit
Rear disc brake conversion
IFS Hub swap & IFS rear axle 1.5" extra width
Battery/Intake swap
35x10.50 Super Swamper Boggers
14" Bilstein Shocks
Low Range Offroad Rear shock bar
Trail Gear 14" front shock hoops
U-bolt flip kits
Greasable front shackles
Homemade front bumper w/ Warn xd9000i
Bucket seats and console from a 95 4runner (better side bolsters and adjustable lumbar)
I added power windows, not factory but used factory switches
A set of half doors will also go with the truck.
I have the tailgate and the tire gate. Both will go with the truck.
The
The bad that I can think of:
-The steering box leaks, I have the rebuild kit to go with the truck though.
-The blend switch broke behind the dash. I just manually worked it under the hood.
-The winch needs a solenoid to work
-The truck does have some rust in the body line of the bed, on the drivers door, and on the front drivers fender where I hit a deer but straightened the fender back out.
Thread
Thread Starter
Forum
Replies
Last Post
TacoTank
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
24
Nov 18, 2017 01:14 PM
BerHntr
Buying & Selling Advice - Feeler/Gauging Interest
3
Dec 2, 2014 05:46 PM






















