FS[SouthCent]: Weber side drafts, header, and ignition setup for Toyota 22R / 22RE
#1
Registered User
Thread Starter
Join Date: Apr 2014
Location: Dallas, Tx
Posts: 415
Likes: 0
Received 0 Likes
on
0 Posts
Weber side drafts, header, and ignition setup for Toyota 22R / 22RE
Price reduction....now asking $1000 obo.
Selling a Side Draft setup for a 22R pulled from a running race vehicle. Pretty much everything you would need to bump your motor up some serious horses, or slap on that newly rebuilt ported head. I've got a fuel injected Runner, a high boost turbo'd truck, and was planning on building up a nice little 22RE for a first gen truck with the stage II head and lower I have but plans have changed. Below is what's included and what it would all cost new:
Canon Side Draft intake for Weber DCOE
Twin Weber 40 DCOE (might need rebuilding, but the kits are cheap)
Weber manual / instruction book
New Velocity stacks
New K&N twin filter kit
LCE Pro Distributor (w/o vacuum advance)
LCE Wire separator kit
Magnecor KV85 Competition wires
MSD 6AL box
MSD Blaster 2 Coil
LCE Street Stainless header
(There's an external inline fuel pump that came with this similar to a Walbro....if I find it, I'll throw it in as well)
Posting on several platforms, but I'll take the post down if / when it sells.
Located in Dallas, but can pack and ship on your nickel.
Let me know if there are other parts you may need, I have about 5 rough totes full of 3 separate motors (22R, 22RE, 22RTE) and a ton of other performance parts.
Might trade for a decent TIG welder - Miller 250 or better and/or lincoln equivalent
Selling a Side Draft setup for a 22R pulled from a running race vehicle. Pretty much everything you would need to bump your motor up some serious horses, or slap on that newly rebuilt ported head. I've got a fuel injected Runner, a high boost turbo'd truck, and was planning on building up a nice little 22RE for a first gen truck with the stage II head and lower I have but plans have changed. Below is what's included and what it would all cost new:
Canon Side Draft intake for Weber DCOE
Twin Weber 40 DCOE (might need rebuilding, but the kits are cheap)
Weber manual / instruction book
New Velocity stacks
New K&N twin filter kit
LCE Pro Distributor (w/o vacuum advance)
LCE Wire separator kit
Magnecor KV85 Competition wires
MSD 6AL box
MSD Blaster 2 Coil
LCE Street Stainless header
(There's an external inline fuel pump that came with this similar to a Walbro....if I find it, I'll throw it in as well)
Posting on several platforms, but I'll take the post down if / when it sells.
Located in Dallas, but can pack and ship on your nickel.
Let me know if there are other parts you may need, I have about 5 rough totes full of 3 separate motors (22R, 22RE, 22RTE) and a ton of other performance parts.
Might trade for a decent TIG welder - Miller 250 or better and/or lincoln equivalent
Last edited by joelsmithdesigns; 07-23-2018 at 06:11 AM.
#5
22r performance parts
I know this was from an old thread but I figured I'd ask anyway. I'm looking for a side draft intake for a 22r. Do you still have one? Any other performance parts you'd like to sell?
Nick
Nick
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
irv
86-95 Trucks & 4Runners
16
12-16-2022 03:57 PM
Hurakane
86-95 Trucks & 4Runners
8
12-14-2012 05:12 AM
AustinTaco
84-85 Trucks & 4Runners
1
06-22-2010 06:40 AM