If I may introduce myself ...
07-05-2005, 04:15 PM
#1
Registered User
Thread Starter
Join Date: Jul 2005
Posts: 9
Likes: 0
Received 0 Likes
on
0 Posts
If I may introduce myself ...
I have been perusing Ya'll's MB off-n-on for quite some time and finally decided to take more advantage of all the experience and brain power I see here! And hopefully contribute some of my experiences from owning 8 Toyos over the last 30yrs.
The project is my '88 4Runner, 3.0/5spd, stock, 150Kmi., runs fine. It's now a daily driver, some highway miles, boat puller, seasonal hunting trails, here in LA . . . Lower Alabama!
I have ~2½, 3.4L/24valve engine parts-n-pieces (enough to build a complete engine w/ECU, harness, etc.). One's got a hole in the block, one's got a wrist pin tick. I have been collecting these engine/parts over the last few months, none have been to the machine shop, yet.
My goal is to build the 3.4 to ~200+hp AND tuned for 20+mpg/highway.
See Ya on the boards,
1Owner
The project is my '88 4Runner, 3.0/5spd, stock, 150Kmi., runs fine. It's now a daily driver, some highway miles, boat puller, seasonal hunting trails, here in LA . . . Lower Alabama!
I have ~2½, 3.4L/24valve engine parts-n-pieces (enough to build a complete engine w/ECU, harness, etc.). One's got a hole in the block, one's got a wrist pin tick. I have been collecting these engine/parts over the last few months, none have been to the machine shop, yet.
My goal is to build the 3.4 to ~200+hp AND tuned for 20+mpg/highway.
See Ya on the boards,
1Owner
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
foampile
03+ 4Runner/GX470, & 05+ Tacomas
1
12-18-2022 01:29 PM
Toys4parts
86-95 Trucks & 4Runners (Build-Up Section)
2
09-26-2015 01:56 PM
