e-locker is in and works great!
10-05-2002, 08:22 AM
#1
Registered User
Thread Starter
Join Date: Aug 2002
Location: Manchester, CT
Posts: 215
Likes: 0
Received 0 Likes
on
0 Posts
e-locker is in and works great!
The locker project is nearing completion. Yesterday, Mike and I put the electric locker third member in. It took from 8:30AM until about 5:30, with a 1 hour lunch break to pull the axle out, perform the drilling/welding/tapping, and then put the axle back in. I haven't been able to test it much, since I haven't re-geared my front yet. The 4.56 gears are a noticeable improvement over stock. I'd guess that once I put 33's on, it'll drive like the stock gears w/32's (which isn't bad at all).
Now, all that's left is the front gears/truetrac, and I have to finally install the CB spacers and ATS A-arms.
Now, all that's left is the front gears/truetrac, and I have to finally install the CB spacers and ATS A-arms.
10-05-2002, 09:31 AM
#2
Registered User
Join Date: Jul 2002
Location: maine
Posts: 712
Likes: 0
Received 0 Likes
on
0 Posts
sweet.
haha
my friend had 4.56 gears in his blazer with 35s. dont think he lost any power.. you should run better than stock with 32's, even once you get the 33's on. want to sell your old tires? i need some. acually im serious, let me know
haha
my friend had 4.56 gears in his blazer with 35s. dont think he lost any power.. you should run better than stock with 32's, even once you get the 33's on. want to sell your old tires? i need some. acually im serious, let me know
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM
