Treknfj (a little history! )
#1
Registered User
Thread Starter
Treknfj (a little history! )
There are some pics of my 07 FJC I bout it back in March of 2006.
First day at home.
Second day.
About 2 weeks later.
Added 4 KC lites to roof rack.
Home made lift (1" auto spring rated rubber).
Before!
After!
New Shoes MTR's 285-70/17s.
First trip with Forum members at Frank Raines OHV park.
Home made Sliders.
Trip to Sour Grass OHV trial.
Slike Rock norcal
Home made Control Arm skid.
Damage before skid!
Trip to Hollister Hills.
Home made High-lift Roof Rack mounts.
Another one of many trips to The Greenhorn Above Grass Valley Ca.
Recent trip to Sierras with Forum members.
My Mini Me!
First day at home.
Second day.
About 2 weeks later.
Added 4 KC lites to roof rack.
Home made lift (1" auto spring rated rubber).
Before!
After!
New Shoes MTR's 285-70/17s.
First trip with Forum members at Frank Raines OHV park.
Home made Sliders.
Trip to Sour Grass OHV trial.
Slike Rock norcal
Home made Control Arm skid.
Damage before skid!
Trip to Hollister Hills.
Home made High-lift Roof Rack mounts.
Another one of many trips to The Greenhorn Above Grass Valley Ca.
Recent trip to Sierras with Forum members.
My Mini Me!
#5
Registered User
Thread Starter
After looking at some of the rear door racks out there, I decided to make my own. So I used shelve channel from hardware store. Cost me about $12. Drilled thought the plastic and bolted the channel to it. Then use a back pack and other bags and Velcro zip ties. Here are some pics.
Trending Topics
#8
Registered User
Thread Starter
Well I haven't added much to my FJ in some time. I've been concentrating on my 87 4runner. But know its time to turn my attention to the FJ. I've been wanting a new front bumper forever. So here it is,
The center section is a brush gaurd off a late 90's Suburban, that I got off of Craigslist.
The wings are 1/8" plate steel.
The bars are .120 DOM tubing.
The mounting are via 1/4" angle iron 4" wide.
I have yet to install the Superwinch I have. That will come soon.
Here are some more pics!!!!
The center section is a brush gaurd off a late 90's Suburban, that I got off of Craigslist.
The wings are 1/8" plate steel.
The bars are .120 DOM tubing.
The mounting are via 1/4" angle iron 4" wide.
I have yet to install the Superwinch I have. That will come soon.
Here are some more pics!!!!
#9
Registered User
Thread Starter
I added a Super Winch EPi 9.0 w/ synthetic line. To the new bumper.
And added some more steel to the under side of the bumper.
Also installed a dual battery set up.
And added some more steel to the under side of the bumper.
Also installed a dual battery set up.
Thread
Thread Starter
Forum
Replies
Last Post
he's gone
95.5-2004 Tacomas & 96-2002 4Runners
7
12-03-2019 07:08 AM
yimbo
Buying & Selling Advice - Feeler/Gauging Interest
9
08-22-2015 03:36 AM
Luvmeye22re
95.5-2004 Tacomas & 96-2002 4Runners
1
08-04-2015 03:53 PM