Hub swap question
#1
Registered User
Thread Starter
Join Date: May 2011
Location: North Dakota
Posts: 94
Likes: 0
Received 0 Likes
on
0 Posts
Hub swap question
Sorry if there's a page about this. I looked but didn't find anything.
I have a '92 4Runner daily driver. It has the auto hubs. Now the CV alxes always turn. I want to lift it and not burn thru axles.
Now I have an '88 pickup with the lockable hubs. Is there any way to swap the two. Nothing way out there but I don't know anything about the process. Just wondering if it was possible to swap them.
Sorry if this is dumb
I have a '92 4Runner daily driver. It has the auto hubs. Now the CV alxes always turn. I want to lift it and not burn thru axles.
Now I have an '88 pickup with the lockable hubs. Is there any way to swap the two. Nothing way out there but I don't know anything about the process. Just wondering if it was possible to swap them.
Sorry if this is dumb
#2
Registered User
Well we do have a sticky for questions like this:
https://www.yotatech.com/forums/f120...s-here-239443/
And its in the FAQ
https://www.yotatech.com/forums/f120/toyota-faq-66255/
With links to a write up here:
https://www.yotatech.com/~corey/tech...etal22lica.htm
Good luck with the swap!
https://www.yotatech.com/forums/f120...s-here-239443/
And its in the FAQ
https://www.yotatech.com/forums/f120/toyota-faq-66255/
With links to a write up here:
https://www.yotatech.com/~corey/tech...etal22lica.htm
Good luck with the swap!
Thread
Thread Starter
Forum
Replies
Last Post