Hub swap question
 

Sorry if there's a page about this. I looked but didn't find anything.

I have a '92 4Runner daily driver. It has the auto hubs. Now the CV alxes always turn. I want to lift it and not burn thru axles.

Now I have an '88 pickup with the lockable hubs. Is there any way to swap the two. Nothing way out there but I don't know anything about the process. Just wondering if it was possible to swap them.

Sorry if this is dumb

Well we do have a sticky for questions like this:

https://www.yotatech.com/forums/f120...s-here-239443/

And its in the FAQ

https://www.yotatech.com/forums/f120/toyota-faq-66255/

With links to a write up here:

https://www.yotatech.com/~corey/tech...etal22lica.htm

Good luck with the swap!

And you DO NOT have auto hubs.
You have ADD. :D

:wabbit2: