Towing Boat with 85 PU?
#1
Towing Boat with 85 PU?
Hello All,
I saw several threads on towing with the 85 Yota PU, but none specific on performance related to boating. I am planning on towing about 2000lb (boat, motor, and trailer) < 5 miles to and from boat ramp, unloading, and loading boat.
Does anyone have any experience doing this? Should I expect things to work out OK as long as I am not planning on highway speeds or long hauls?
Thanks,
Dave
85 PU, short bed, 2wd, 4 speed, stock.
I saw several threads on towing with the 85 Yota PU, but none specific on performance related to boating. I am planning on towing about 2000lb (boat, motor, and trailer) < 5 miles to and from boat ramp, unloading, and loading boat.
Does anyone have any experience doing this? Should I expect things to work out OK as long as I am not planning on highway speeds or long hauls?
Thanks,
Dave
85 PU, short bed, 2wd, 4 speed, stock.
#6
Registered User
Join Date: Jul 2006
Location: INDIANA
Posts: 2,149
Likes: 0
Received 0 Likes
on
0 Posts
this is what I was pulling with a carbed 86
I don't know how heavy it was but it pulled fine my rear pinion seal was pretty bad and had a little leak after pulling that boat a few times I need to get another third member mine has developed a click and light clunk on take off.
but not only was I pulling the boat around the same time but I was mudding and wheeling at a local spot so both could have contributed to the third starting to fail.
where I live it is hilly I had to shift into 2nd on most hills but it pulled fine I am also in need of new brake pads soon that boat pushed me down most hills and my pads wore much faster then usual.
I don't know how heavy it was but it pulled fine my rear pinion seal was pretty bad and had a little leak after pulling that boat a few times I need to get another third member mine has developed a click and light clunk on take off.
but not only was I pulling the boat around the same time but I was mudding and wheeling at a local spot so both could have contributed to the third starting to fail.
where I live it is hilly I had to shift into 2nd on most hills but it pulled fine I am also in need of new brake pads soon that boat pushed me down most hills and my pads wore much faster then usual.
#7
Registered User
Join Date: Jan 2008
Location: Parker, CO
Posts: 317
Likes: 0
Received 0 Likes
on
0 Posts
this is what I was pulling with a carbed 86
I don't know how heavy it was but it pulled fine my rear pinion seal was pretty bad and had a little leak after pulling that boat a few times I need to get another third member mine has developed a click and light clunk on take off.
but not only was I pulling the boat around the same time but I was mudding and wheeling at a local spot so both could have contributed to the third starting to fail.
where I live it is hilly I had to shift into 2nd on most hills but it pulled fine I am also in need of new brake pads soon that boat pushed me down most hills and my pads wore much faster then usual.
I don't know how heavy it was but it pulled fine my rear pinion seal was pretty bad and had a little leak after pulling that boat a few times I need to get another third member mine has developed a click and light clunk on take off.
but not only was I pulling the boat around the same time but I was mudding and wheeling at a local spot so both could have contributed to the third starting to fail.
where I live it is hilly I had to shift into 2nd on most hills but it pulled fine I am also in need of new brake pads soon that boat pushed me down most hills and my pads wore much faster then usual.
Thread
Thread Starter
Forum
Replies
Last Post
justdifferentials
Vendors Build-Ups (Build-Up Section)
14
06-11-2017 08:36 PM
Cycles
86-95 Trucks & 4Runners
8
09-29-2015 06:37 AM
Odin
86-95 Trucks & 4Runners
3
09-26-2015 06:56 PM