Rock Slider

getitdone · 06-16-2006, 09:11 PM

Every time I say it, it's like Backslider from the Toadies.

Garrett and I have made some sliders for my truck. Actually we made these things a while ago, but they are still not painted and installed. Mainly cause I decided to sleeve the frame and had to have the gas tank off to do so.

Just sticking it up there to see...

AtTACKing!

So far so good. On a side note, MAN that crossmember hangs low. What to do.

Don't worry, I kicked both sides out.

1" kicks.

Keep it comming.

Note to self, get a good chop saw. HF sucks!!! Lots of grinding to fix bad angles.

All tacked up. Do it all over again for the other side.

More pics of how it looks now later. Can you dig it?

***Corey*** · 06-16-2006, 09:16 PM

I can dig it, you can dig it, she can dig it, he can dig it, we can dig it, yeaaaah!

Looks good!
You are probably to young to know the meaning of the above though

Nice to see custom fab jobs.

getitdone · 06-16-2006, 09:20 PM

Quote:

Originally Posted by Corey

Nice to see custom fab jobs.

That's why I love the fab section!

AxleIke · 06-16-2006, 11:27 PM

very nice. Glad you added the kickouts. Those are key to a good set of sliders. Straights do you little good.

drguitarum2005 · 06-16-2006, 11:41 PM

what exactly are the kickouts?

wrenchmonster · 06-17-2006, 12:50 AM

Quote:

Originally Posted by Corey

I can dig it, you can dig it, she can dig it, he can dig it, we can dig it, yeaaaah!

Friends of Distinction?

Or part of the movie "The Warriors" where the leader of RIF is speaking at the gang jamboree.

MorphiasX · 06-17-2006, 02:17 AM

Quote:

Originally Posted by drguitarum2005

what exactly are the kickouts?

So that if you are sliding along a rock it kicks the truck away from the rock, instead of running the rock right into the tire. Also, if you have tires that stick out past the fender a little bit, it helps.

Tanto · 06-17-2006, 04:59 AM

The one shot down the side of your sliders looks like that 2nd to last support piece is a little out of line w/the others but you probably fixed that already. I like how it hugs the panels!

getitdone · 06-17-2006, 05:51 AM

Yea, it's fixed. Everything was nice and tight before fully welding.

dr guitar look at the 5th pic. That's a kick out.

***Corey*** · 06-17-2006, 06:06 AM

Quote:

Originally Posted by wrenchmonster

Friends of Distinction?

Or part of the movie "The Warriors" where the leader of RIF is speaking at the gang jamboree.

It is from a song from the late 60s or ealry 70s.
I can not remember the groups name, but it had a catchy tune and the lyrics to it.
Google, thanks for the name of the band

Song = Grazing In the Grass
http://www.friendsofdistinction.com
Click the yellow album to listen.

06-16-2006, 09:11 PM	#1 (permalink)
getitdone Contributing Member Join Date: Jul 2004 Location: Ft. Collins, Co Posts: 1,016	Rock Slider Every time I say it, it's like Backslider from the Toadies. Garrett and I have made some sliders for my truck. Actually we made these things a while ago, but they are still not painted and installed. Mainly cause I decided to sleeve the frame and had to have the gas tank off to do so. Just sticking it up there to see... AtTACKing! So far so good. On a side note, MAN that crossmember hangs low. What to do. Don't worry, I kicked both sides out. 1" kicks. Keep it comming. Note to self, get a good chop saw. HF sucks!!! Lots of grinding to fix bad angles. All tacked up. Do it all over again for the other side. More pics of how it looks now later. Can you dig it? __________________ Chris Fischer 3D 85 4Runner SR5 \| 33" BFG M/T on flat black rims \| Chevy springs \| Custom Grab cage with overhead cb mount \| Custom fabbed center console \| Freshly rebuilt axle with IFS hub/caliper swap \| Rock Sliders \| Lots more... In Colorado, Dig.

06-16-2006, 09:16 PM	#2 (permalink)
*Corey* Co-Founder/Administrator Staff Join Date: May 2002 Location: Auburn, Washington Posts: 23,819	I can dig it, you can dig it, she can dig it, he can dig it, we can dig it, yeaaaah! Looks good! You are probably to young to know the meaning of the above though Nice to see custom fab jobs. __________________ Corey 2007 FJ Cruiser ARB bumper, Warn XD9000, OME lift, roof top tent, so much more, see my website & buildup thread PNW FJ Cruisers ☺ Detailing 101 ☺ Join Topsites ☺ Muffler Comparisons ☺ Maggiolinas In The Wild FJ Cruiser Buildup ☺ New Roof Top Tent ☺ Video Of My Penthouse ☺ Rehinge Your ARB/Engel Fridge

06-16-2006, 11:27 PM	#4 (permalink)
AxleIke Contributing Member Join Date: Apr 2004 Location: Boulder, Colorado Posts: 4,558	very nice. Glad you added the kickouts. Those are key to a good set of sliders. Straights do you little good. __________________ IFS SAS My mods aren't bling enough for the signature line. -All Terrains are for when you know how to drive.

06-16-2006, 11:41 PM	#5 (permalink)
drguitarum2005 Contributing Member Join Date: Dec 2005 Location: Houston (home), Atlanta (school), Cincinnati (work) Posts: 2,219	what exactly are the kickouts? __________________ -David 2000 Taco TRD Access Cab v6 \| 5spd \| 33" BFG A/Ts \| 33" PC Mud Terrains \| OME 882's \| Bilstein HD struts front \| Rancho shocks rear \| Chevy 63" leaf spring swap \| Custom sliders \| Custom front bumper \|3" BL \| U-Bolt flip \| Flowmaster exhaust \| Kenwood Speakers \| Grey Wire Mod \| Aux. Reverse Lights \| Deckplate Mod \| Lots of lights Pictures

06-17-2006, 05:51 AM	#9 (permalink)
getitdone Contributing Member Join Date: Jul 2004 Location: Ft. Collins, Co Posts: 1,016	Yea, it's fixed. Everything was nice and tight before fully welding. dr guitar look at the 5th pic. That's a kick out. __________________ Chris Fischer 3D 85 4Runner SR5 \| 33" BFG M/T on flat black rims \| Chevy springs \| Custom Grab cage with overhead cb mount \| Custom fabbed center console \| Freshly rebuilt axle with IFS hub/caliper swap \| Rock Sliders \| Lots more... In Colorado, Dig. Last edited by getitdone : 06-17-2006 at 09:25 AM.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another Rock Slider ?	Jdizzydub	95.5-2004 Tacomas & 96-2002 4Runners	8	04-16-2007 09:53 PM
Rock slider lights?	jmagnuss	03+ 4Runner/GX470, & 05+ Tacomas	2	03-05-2007 04:09 PM
Rock Slider Question...weld Or Bolt On?	05TACODOC	Offroad Tech	17	05-15-2005 02:17 PM
Rock Slider square tube diameter?	rngrchad	95.5-2004 Tacomas & 96-2002 4Runners	11	10-05-2004 09:52 AM
Stubbs Welding rock slider reveiw????	weldpro	95.5-2004 Tacomas & 96-2002 4Runners	22	01-05-2004 03:19 PM