Finally Jumped on the Doorless Bandwagon
#1
Registered User
Thread Starter
Join Date: Sep 2005
Location: Dillsburg, PA
Posts: 621
Likes: 0
Received 0 Likes
on
0 Posts
Finally Jumped on the Doorless Bandwagon
Well, after months of procrastination, I used Father's Day weekend to make my doors removable. It was one of the few projects that I've done in recent years that hasn't caused me any grief in the process. I must say that I'm pleased with the outcome and that it's uberfun to drive around without doors. I'll take/post pictures this weekend since I wasn't able to get many while I was working on
UPDATE:
Here are the pictures that I promised too long ago.
One of my friends cutting off the passenger side pins.
Me putting the hinges back on the door
Here's what the pins look like that I made. I used 5/16" bolts rather than 8 mm because we had a bunch in the garage. I cut them down, rounded off the heads, and drilled a 3/32" (I think) hole for the clips.
Look, no doors!
Finally, a terribly blurry picture of the door on with the new pins
UPDATE:
Here are the pictures that I promised too long ago.
One of my friends cutting off the passenger side pins.
Me putting the hinges back on the door
Here's what the pins look like that I made. I used 5/16" bolts rather than 8 mm because we had a bunch in the garage. I cut them down, rounded off the heads, and drilled a 3/32" (I think) hole for the clips.
Look, no doors!
Finally, a terribly blurry picture of the door on with the new pins
Last edited by mehret; 07-20-2007 at 05:18 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Big Little Bear
Pre 84 Trucks (Build-Up Section)
230
11-13-2023 11:42 AM
CPD4runner
86-95 Trucks & 4Runners (Build-Up Section)
9
11-05-2017 06:01 AM
Longbed 90
86-95 Trucks & 4Runners
27
10-19-2015 11:05 AM