westy44runner

Please post some pictures of your 1st gen with the BJ spacers and rear lift (and what your rear lift consists of)combo....looking to see some pics of this setup with 33s...thanks

4Crawler

iTrader: (3)

Its not a 4Runner, but a pickup w/ about a 1"-1.5" torsion bar lift (basically the same height as the BJ spacer), rear stock springs w/ Ranch Soft Ride AAL and a 1" lift (2" longer) rear spring shackle:



More info and link to page with more photos (see "Don West's '94 pickup"):
http://www.4crawler.com/4x4/ForSale/...it.shtml#FAQ10

seaflea

Here is one of my rig lat last year.

shiftless89

Here you go. Just did mine last month

https://www.yotatech.com/forums/f31/finally-before-after-pics-57692/

bryan

Hey shiftless89 maybe I missed it but what do you have in the back? AAL, lift springs, or shcakles? I am trying to figure out what to do about my butt sag. Thanks Bryan

nmtoy

Bryan,
I noticed you are in Rio Rancho, my 86 4runner has ball joint spacers in front and 1.5" lift shackles in back to get rid of the butt sag. I also added an add a leaf in the rear and removed my overload leaf and that got me about 2 inches of lift compared to stock. I am in Albuquerque, let me know if you want to look at my truck. My email is robbtt@aolo.com

shiftless89

I put shackles on it from central 4wd they add 1.5". my truck already had an AAL on it from the PO. I believe he took out one leaf (not sure which). so in effect I have both AAL and shackles.! On level ground my truck sits about 1" higher in the back.

Good luck
Mike