Alpine HU installation
01-31-2003, 11:39 AM
#1
Registered User
Thread Starter
Join Date: Oct 2002
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Alpine HU installation
re thread:
https://www.yotatech.com/forums/show...&threadid=5585
I finally resolved this.
I removed Toyota's amplifier and the noise is gone.
It wasn't complicated, but I talked to 2 professional installers
and both gave me wrong advice and parts!!!
Leon
https://www.yotatech.com/forums/show...&threadid=5585
I finally resolved this.
I removed Toyota's amplifier and the noise is gone.
It wasn't complicated, but I talked to 2 professional installers
and both gave me wrong advice and parts!!!
Leon
01-31-2003, 01:12 PM
#3
Registered User
Join Date: Nov 2002
Location: Phoenix, AZ
Posts: 695
Likes: 0
Received 0 Likes
on
0 Posts
Good to hear you got it fixed...I didnt' see your original thread, or I would have pointed you in that direction right off...I might have been out of town when you posted it or something??? Anyways, yes, you must remove the factory amp WHENEVER POSSIBLE in all cars 
~only exception being the new dodges, which you can interface without much interferance.
~only exception being the new dodges, which you can interface without much interferance.
01-31-2003, 03:27 PM
#4
Registered User
Join Date: Jul 2002
Location: San Antonio, TX
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
Agreed. In some applications it will work fine, however having the stock amplifier inline will only limit available headroom and possibly induce distortion (like you were experiencing) into the system because of different I/O levels.
Glad you got it working!
Glad you got it working!
Thread
Thread Starter
Forum
Replies
Last Post
punks_is_4x4
86-95 Trucks & 4Runners
10
08-21-2015 01:35 PM
Esibnitsud
86-95 Trucks & 4Runners
0
07-30-2015 08:19 PM
