1st Gen 4runner body Linked n bobbed (WA)
#1
Registered User
Thread Starter
Join Date: Nov 2006
Location: Seattle
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
1st Gen 4runner body Linked n bobbed (WA)
89 1st gen 4runner body and frame. Former S&N employee's build.
Included:
- bobbed removable canopy (it's 1/2 long), side glass, but no rear glass.
- Slick 2" integrated roll cage, tied into rock sliders and frame
- Custom removable transmission / case slider / 4-link rock slider. Bolts to custom frame inserts welded in.
- Comes with 2 doors that have glass. One is installed (removable pins), the other is not installed yet.
- Air or coilover shock hoops integrated into roll cage and frame.
- Bobbed body at the tail, professionally done.
- Rattle-canned army green paint for protection
- inexpensive bed coating on interior.
- No rear door.
Located in Washington State, email for details. No tires or axles.
Note:
No drivetrain, axles, shocks, coilovers, tires or anything besides the body, frame, canopy and other elements listed above. This is a rare opportunity to snag a 4-link ready, bobbed (well), caged (well and in 2"!) 1st gen 4runner.
Frankly I hate myself for selling it. I will for a long time hate the fact that I'm selling it. Reality is making me. Therefore, I beg you to build this into the truck that it should be. A light, narrow and awesome 1st gen runner.
Signed Title of the last owner included. First Cash only. I really prefer this goes to someone who will build it and love it. Send questions to boxxerace @ hotmail.com or post them up here.
$1,100. Will require a trailer or a box truck with a lift-gate to move. Thanks to the skid plate, it's mighty slippery underneath.
Included:
- bobbed removable canopy (it's 1/2 long), side glass, but no rear glass.
- Slick 2" integrated roll cage, tied into rock sliders and frame
- Custom removable transmission / case slider / 4-link rock slider. Bolts to custom frame inserts welded in.
- Comes with 2 doors that have glass. One is installed (removable pins), the other is not installed yet.
- Air or coilover shock hoops integrated into roll cage and frame.
- Bobbed body at the tail, professionally done.
- Rattle-canned army green paint for protection
- inexpensive bed coating on interior.
- No rear door.
Located in Washington State, email for details. No tires or axles.
Note:
No drivetrain, axles, shocks, coilovers, tires or anything besides the body, frame, canopy and other elements listed above. This is a rare opportunity to snag a 4-link ready, bobbed (well), caged (well and in 2"!) 1st gen 4runner.
Frankly I hate myself for selling it. I will for a long time hate the fact that I'm selling it. Reality is making me. Therefore, I beg you to build this into the truck that it should be. A light, narrow and awesome 1st gen runner.
Signed Title of the last owner included. First Cash only. I really prefer this goes to someone who will build it and love it. Send questions to boxxerace @ hotmail.com or post them up here.
$1,100. Will require a trailer or a box truck with a lift-gate to move. Thanks to the skid plate, it's mighty slippery underneath.
Last edited by boxxerace; 12-06-2012 at 07:24 PM.
#2
Registered User
Thread Starter
Join Date: Nov 2006
Location: Seattle
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Another (old) photo showing the roll cage in the back. Designed for passengers in the rear seats (I have kids).
Hole in back is for the fuel cell access and rear air shocks. (not included).
Hole in back is for the fuel cell access and rear air shocks. (not included).
#5
Registered User
Thread Starter
Join Date: Nov 2006
Location: Seattle
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Last edited by boxxerace; 12-03-2012 at 07:24 PM.
#6
Registered User
Thread Starter
Join Date: Nov 2006
Location: Seattle
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Here are some more photos for you to ponder over:
Note: I remove the piece of cage over drivers head. I'm taller than the original owner. Move inboard about 2" and it's perfect. Original tube included.
Note: I remove the piece of cage over drivers head. I'm taller than the original owner. Move inboard about 2" and it's perfect. Original tube included.
Trending Topics
#13
Registered User
Thread Starter
Join Date: Nov 2006
Location: Seattle
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
#16
Registered User
Thread Starter
Join Date: Nov 2006
Location: Seattle
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
1st Gen Toyota runner with a sweet two inch cage and all setup for 4-link suspension.... AND YOU DON'T WANT IT?!?
For sale, but only for a short time now. Consider how rare these are getting and how cool of a rig this will make.
Contact me ;P boxxerace (at) hotmail.com
For sale, but only for a short time now. Consider how rare these are getting and how cool of a rig this will make.
Contact me ;P boxxerace (at) hotmail.com
#17
Registered User
Thread Starter
Join Date: Nov 2006
Location: Seattle
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Update, Update, Update, new price! Make this an inexpensive and RAD Christmas present for yourself.
$700.00 in cash and this link-ready, bobbed, caged and 1st gen Toyota is yours. I really want to see this go to a good home and get built!
I am near Boeing in Everett, WA. Contact me asap!
$700.00 in cash and this link-ready, bobbed, caged and 1st gen Toyota is yours. I really want to see this go to a good home and get built!
I am near Boeing in Everett, WA. Contact me asap!
#20
Registered User
Thread Starter
Join Date: Nov 2006
Location: Seattle
Posts: 109
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
FS[SouthEast]: 1st Gen 4Runner Slider Window, Driver Side
coryc85
Misc Stuff (Vehicle Related)
0
07-06-2015 04:07 AM