some free some not
09-01-2007, 09:36 AM
#1
Registered User
Thread Starter
Join Date: Jun 2003
Location: Lilburn, Georgia
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
84 front axle parts. got everything. 10 bolt is gone.
aisin hubs. 2 complete and two in pieces. not sure if i got all the parts.
warn hubs. same situation as above.
3 stock long side inners
3 stock short side inners
2 stock birfs. on already on a long side inner and one on a short
3 spindles
3 knuckles
84 stright housing
84 open third with 4.30's i think
stock steering arms.
2 hub housings still attached to the rotors.
2 calipers. maybe 4 can't remember how many i got.
maybe some more stuff too. can't remember it right now. i'm in class so just going on memory right now.
let me know if interested.
thanks,
alan
soon to have super lift front 4-5 inch sus. lift off my 4runner after i do my swap. 200 obo
looking for sas parts. hanger, shock hoops, shocks, etc.
best way to get a hold of me is email. asumooses@hotmail.com
located in lilburn ga. (near stone mountain) or in carrollton ga. (where i go to school)
thanks,
alan
warn hubs. same situation as above.
3 stock long side inners
3 stock short side inners
2 stock birfs. on already on a long side inner and one on a short
3 spindles
3 knuckles
84 stright housing
84 open third with 4.30's i think
stock steering arms.
2 hub housings still attached to the rotors.
2 calipers. maybe 4 can't remember how many i got.
maybe some more stuff too. can't remember it right now. i'm in class so just going on memory right now.
let me know if interested.
thanks,
alan
soon to have super lift front 4-5 inch sus. lift off my 4runner after i do my swap. 200 obo
looking for sas parts. hanger, shock hoops, shocks, etc.
best way to get a hold of me is email. asumooses@hotmail.com
located in lilburn ga. (near stone mountain) or in carrollton ga. (where i go to school)
thanks,
alan
Last edited by 884runner; 09-05-2007 at 10:49 PM.
09-05-2007, 10:47 PM
#5
Registered User
Thread Starter
Join Date: Jun 2003
Location: Lilburn, Georgia
Posts: 369
Likes: 0
Received 0 Likes
on
0 Posts
aisin hubs. 2 complete and two in pieces. not sure if i got all the parts.
warn hubs. same situation as above.
3 stock long side inners
3 stock short side inners
2 stock birfs. on already on a long side inner and one on a short
3 spindles
3 knuckles
84 stright housing
84 open third with 4.30's i think
stock steering arms.
2 hub housings still attached to the rotors.
2 calipers. maybe 4 can't remember how many i got.
maybe some more stuff too. can't remember it right now. i'm in class so just going on memory right now.
let me know if interested.
thanks,
alan
09-10-2007, 04:01 AM
#7
Contributing Member
Join Date: Jun 2006
Posts: 4,047
Likes: 0
Received 0 Likes
on
0 Posts
Hey - I posed on your other thread, are these different axles, or are both posts about the same axle?
Let me know what you want for a set of Hubs...Calipers... and a Steering Knuckle(s)..... PM me let me know.
Let me know what you want for a set of Hubs...Calipers... and a Steering Knuckle(s)..... PM me let me know.
Trending Topics
09-11-2007, 06:17 AM
#8
Registered User
Join Date: Aug 2005
Location: Yorktown, Va
Posts: 138
Likes: 0
Received 0 Likes
on
0 Posts
Manual Hubs
Are you seeling the manual hubs or not?
If you want to keep the good set I understand but do you want to
sell the pair that is broken down I could use the housing and dial.
If you want to keep the good set I understand but do you want to
sell the pair that is broken down I could use the housing and dial.
Thread
Thread Starter
Forum
Replies
Last Post
kawazx636
The Classifieds GraveYard
34
10-06-2021 03:03 PM
LCE_Performance
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
0
10-01-2015 01:03 PM
hiluxinargentina
86-95 Trucks & 4Runners
3
09-30-2015 05:51 PM
