FS 87 4 runner 22rte stick!
02-20-2008, 05:52 PM
#1
Registered User
Thread Starter
Join Date: Oct 2007
Location: NW burbs of chicago
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
FS 87 4 runner 22rte stick!
Well for starters super rare turbo truck! 22RTE! with a CT20 turbo! watch out!
Has 205k on the body! and frame! The motor and drive train has 125 k on it!
The truck is manual! and has the digital dash and is loaded sun roof and power every thing!
The turbo 4 runner only came in auto! but at about 200k it blew a head gasket And my buddy had a 117k really rusty 87 turbo truck so I swapped in that drive train!
4x4 works great and has 410 gears that are factory so it pretty good on gas i get about 18.5 MPG city on 30 inch tires!
These motors are not hot rods! they are 7 /7.5 to 1 comp and only make 6 psi and were made to run on 87 octane with out an intercooler!
in the last 3 months I have redone the front brakes and adjusted the rears along with replaced the lines!
Did the timing chain kit ! and adjusted the valves! runs great!
don't forget the backs on these come off to open the back seats to the sky!
Has factory roll bar!
asking 2800 obo!
when i did the chain kit!
oh it also got a tone up!
and yes it has rust in the 1/4 panels i just wire brushed it really good then primed and painted it!
here are some pics from before i had it!
Has 205k on the body! and frame! The motor and drive train has 125 k on it!
The truck is manual! and has the digital dash and is loaded sun roof and power every thing!
The turbo 4 runner only came in auto! but at about 200k it blew a head gasket And my buddy had a 117k really rusty 87 turbo truck so I swapped in that drive train!
4x4 works great and has 410 gears that are factory so it pretty good on gas i get about 18.5 MPG city on 30 inch tires!
These motors are not hot rods! they are 7 /7.5 to 1 comp and only make 6 psi and were made to run on 87 octane with out an intercooler!
in the last 3 months I have redone the front brakes and adjusted the rears along with replaced the lines!
Did the timing chain kit ! and adjusted the valves! runs great!
don't forget the backs on these come off to open the back seats to the sky!
Has factory roll bar!
asking 2800 obo!
when i did the chain kit!
oh it also got a tone up!
and yes it has rust in the 1/4 panels i just wire brushed it really good then primed and painted it!
here are some pics from before i had it!
02-21-2008, 06:45 AM
#5
Registered User
Join Date: Aug 2003
Posts: 272
Likes: 0
Received 0 Likes
on
0 Posts
Can you take more pictures of the affected rust areas? Are they surface rust or are they rust holes? Also any more interior pics?
Does it leak any fluids? How's the exhaust? does the top leak at all?
thanks in advance.
Does it leak any fluids? How's the exhaust? does the top leak at all?
thanks in advance.
02-21-2008, 04:17 PM
#6
Registered User
Thread Starter
Join Date: Oct 2007
Location: NW burbs of chicago
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Sorry it may be some time before i get a cam!
funny thing out of all my toyota this is the only one that leaks nothing!!!
turbo rebuilt hmmm i would say 30k ago!
there is holes in the 1/4 but timy rustly surface rust but this is not a rust free truck but the frame is good in the chanels on both sides!
the sides clean small rip in driver seat but is the loaded sr5 turbo
6 way seats! and there are no inside leaks!
funny thing out of all my toyota this is the only one that leaks nothing!!!
turbo rebuilt hmmm i would say 30k ago!
there is holes in the 1/4 but timy rustly surface rust but this is not a rust free truck but the frame is good in the chanels on both sides!
the sides clean small rip in driver seat but is the loaded sr5 turbo
6 way seats! and there are no inside leaks!
02-21-2008, 04:58 PM
#7
Registered User
Join Date: Oct 2007
Location: Seattle, WA 98107 (Ballard geek)
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
Bumpity (even though it doesn't need it.) Truck looks awesome. If I hadn't already committed to a sweet truck of my own, I might have had to take a pleasant over the border stroll down from WI to look at it. GL with the sale!
Trending Topics
02-22-2008, 03:41 AM
#9
Registered User
Thread Starter
Join Date: Oct 2007
Location: NW burbs of chicago
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
02-23-2008, 02:39 PM
#10
Registered User
Thread Starter
Join Date: Oct 2007
Location: NW burbs of chicago
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Hey i took a ton of photos today I also have a spare tail gate that some with it
http://smg.photobucket.com/albums/v488/kevinkovac/
also the front fender for these trucks are really cheap to get a set
I was going to fix them come spring but i need to sell it and get some thing better on gas since i'm buying a house!
the things i would replace shocks and belts !
The belts are in good shape but once you get up to around 55000RPM
they seem to slip but there not lose !
http://smg.photobucket.com/albums/v488/kevinkovac/
also the front fender for these trucks are really cheap to get a set
I was going to fix them come spring but i need to sell it and get some thing better on gas since i'm buying a house!
the things i would replace shocks and belts !
The belts are in good shape but once you get up to around 55000RPM
they seem to slip but there not lose !
Thread
Thread Starter
Forum
Replies
Last Post
tpd143
General Vehicle Related Topics (Non Year Related)
1
07-07-2015 09:06 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
07-06-2015 01:20 PM
