terminator

iTrader: (1)

I didn't see anything so I thought why not ask here. I'm putting my TRD Ivan Stewart wheels up for trade and a member with manual hubs asked if they'll fit over his hubs. I'm sure it will fit but with no experience I told him I'd post here to ask for piece of mind. Please confirm.
Thanks

iceman601

Nope....it won't fit. The center hole for the wheep cap is not big enough to fit over the manual hubs. Ran into the same problem when I put in manual hubs so I sold my Ivans too.

terminator

iTrader: (1)

Hmm, that blows.

vwfastg60

Can you have them milled out to fit? I really want Ivans on my truck for my next set and planned on having the center bore opened up.

terminator

iTrader: (1)

Sure, just find a machine shop that can do the two you plan to use for the fronts and you're good, the rears will require nothing on a stock axle.

Ron Helmuth

just to clarify- when you say manual hubs you are meaning aftermarket manual hubs not Toyota 5 speed manual transmission hubs right?

I just got a set of these on craigslist. I am getting ready to bolt them up...

scuba

What in the hell are you saying? What is a Toyota 5speed manual transmission hub? I've never heard of one.

Elton

soo your saying theirs different types of 6x5.5 ?

Ron Helmuth

scuba-I am a manual transmission not an automatic. Never had a clue the front hubs were larger than the rears but see post #5. See original post for basis of my question.

elton-that's the bolt pattern I believe you are referring to- no, no change in bolt pattern-just the size of the hub circumference.

I'll post back either way- I am cleaning them up now.

scuba

Auto / Manual has nothing to do with anything in this case. You either have em or not. They are manual hubs. Not manual transmission hubs, there's no such thing. Now I see where he's going with the "they'll fit on the rear just fine, but the front is another issue". Which sounds correct. However, the add front "covers" are the same size as the manual hubs...

Just my 2cents.