TMZ

That is the internet connection. No it is the starter wire. The 3.0 starter wire is in the engine harness, but not in the 3.4 harness. I add it it to make install easier.

Blown2001Runner

so it just runs down the starter?? It triggers the starter solenoid?

RobD

Yes. It's the one wire that got missed during my conversion. My brother's neighbour did the wiring for me and he just sorta taped it off in the harness on the chassis side of the harness. When I went to start the truck for the first time, nothing...I got power to all the gauges and you could hear the fuel pump...so, after a few hours of troubleshooting, I looked at the top of the starter and found there was no wire to the solenoid. I dug back into the harness, found the wire, spliced a plug onto it and bada bing...fired right up.

Blown2001Runner

seems like the 3.4 swap threads have all kinds of photos of the engine, but did anyone take detalied photos of their wiring harness connectors at all the vital points?

Greg_Canada

Actually, it isnt just plug and play, you have to use the oil pressure sensor from the 3.0, if it has an SR5 dash. (3.4's use a dummy light sensor).

cadi_daddy

i received my order from you today tim. everything looks great. thanks a lot.
jason

LukaDuke15

I received my harness from Tim on Tuesday. just wanted to say Tim does great work everything looks very clean and is exactly what i wanted. If you need a harness i would recommend going through Tim.
-Lucas

cadi_daddy

x2

jason

Gravehunter

... nevermind

SHAKEHL04

how much for the wiring let me know asap shakehl04@yahoo.com

kaz

Was really wondering if any of u had this TIS tech site link?

UKrunner

Hey Tim, out of pure curiosity, how much for a complete and total harness for a 98 3.4 to 91 SR5 auto, retaining AC, cruise and 4x4?

Would ya send me a pm? Thanks.

Gravehunter

www.techinfo.toyota.com
Save it all to your computer and then you can access it whenever you want and not have to pay to access the site again.

sunnbumm

I'm sold TMZ. I will take one. I will PM you the specs of my swap.
btw- I am doing this swap with an auto.

2drunner

Hey Tim, I just started my coversion today. I have a 1990 2dr 4runner 3.0 5speed. I'm putting in a 1999 3.4 5peed. Do you still sell harness's? If so is it a plug and play? I live in California, so it needs to pass smog. Thanks Mark

Dan p

please do it

toyotaman1371

i would pay a couple hundred dollars for one for a 1992 4.3 tbi to 1990 yota v6 5-speed manual tranny, please let me know if you would be willing to do this and i will give more info. thanks

UKrunner

Guys this thread is dead. TMZ appears to not be interested anymore.

Thread needs to be closed.

waskillywabbit

iTrader: (-1)

Bad seller. Buyer beware. Thread closed.