Bed Accessory Suggestions
#62
Registered User
Join Date: Jul 2010
Location: Ontario, California
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
#64
Registered User
Join Date: Jul 2010
Location: Ontario, California
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
When I was searching for a shell, I ran into the same issue, come to find out the 3rd gen's had that 7'4" option. Don't quote me but I think it was only for the DLX model trucks, which mine is. The manufacturer of my shell is RAIDER out of Canada.
#66
Registered User
Join Date: Jul 2010
Location: Ontario, California
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
irab88,
The differences between our beds and the taco's is the height of the cab and the angle of the rear window. My buddy has a '99 (I think) taco and there's about a 1.5" difference in cab height. (again I'm not sure who's is taller off the top of my head) but if you just need the be measurements the pre 2000 taco's have very nearly identical length, width, and inner height. the height between the bed rail and the bottom flat part of the bed.
Hey if you're in need of a shell, I'm off work tuesday and can surf the reaches of the web for a shell. I can PM you if I find anything once I learn how to PM lol
EDIT: nice pics btw. your truck looks nice and clean.
The differences between our beds and the taco's is the height of the cab and the angle of the rear window. My buddy has a '99 (I think) taco and there's about a 1.5" difference in cab height. (again I'm not sure who's is taller off the top of my head) but if you just need the be measurements the pre 2000 taco's have very nearly identical length, width, and inner height. the height between the bed rail and the bottom flat part of the bed.
Hey if you're in need of a shell, I'm off work tuesday and can surf the reaches of the web for a shell. I can PM you if I find anything once I learn how to PM lol
EDIT: nice pics btw. your truck looks nice and clean.
Last edited by T.O'Brien; 07-12-2010 at 09:20 PM.
#67
Registered User
Join Date: Jun 2010
Location: West Virginia : the state not near Richmond!
Posts: 487
Likes: 0
Received 1 Like
on
1 Post
irab88,
The differences between our beds and the taco's is the height of the cab and the angle of the rear window. My buddy has a '99 (I think) taco and there's about a 1.5" difference in cab height. (again I'm not sure who's is taller off the top of my head) but if you just need the be measurements the pre 2000 taco's have very nearly identical length, width, and inner height. the height between the bed rail and the bottom flat part of the bed.
Hey if you're in need of a shell, I'm off work tuesday and can surf the reaches of the web for a shell. I can PM you if I find anything once I learn how to PM lol
EDIT: nice pics btw. your truck looks nice and clean.
The differences between our beds and the taco's is the height of the cab and the angle of the rear window. My buddy has a '99 (I think) taco and there's about a 1.5" difference in cab height. (again I'm not sure who's is taller off the top of my head) but if you just need the be measurements the pre 2000 taco's have very nearly identical length, width, and inner height. the height between the bed rail and the bottom flat part of the bed.
Hey if you're in need of a shell, I'm off work tuesday and can surf the reaches of the web for a shell. I can PM you if I find anything once I learn how to PM lol
EDIT: nice pics btw. your truck looks nice and clean.
and that is a nice clean truck, especially for being off the east coast, I'm over here too, but anyway, if your on a budget for an accesory a rollbar like I have can be bought used out of peoples yards and on occasin out of their truck beds, for under 50$, personally mine was a graduation gift from an old friend.
#70
irab88,
The differences between our beds and the taco's is the height of the cab and the angle of the rear window. My buddy has a '99 (I think) taco and there's about a 1.5" difference in cab height. (again I'm not sure who's is taller off the top of my head) but if you just need the be measurements the pre 2000 taco's have very nearly identical length, width, and inner height. the height between the bed rail and the bottom flat part of the bed.
Hey if you're in need of a shell, I'm off work tuesday and can surf the reaches of the web for a shell. I can PM you if I find anything once I learn how to PM lol
EDIT: nice pics btw. your truck looks nice and clean.
The differences between our beds and the taco's is the height of the cab and the angle of the rear window. My buddy has a '99 (I think) taco and there's about a 1.5" difference in cab height. (again I'm not sure who's is taller off the top of my head) but if you just need the be measurements the pre 2000 taco's have very nearly identical length, width, and inner height. the height between the bed rail and the bottom flat part of the bed.
Hey if you're in need of a shell, I'm off work tuesday and can surf the reaches of the web for a shell. I can PM you if I find anything once I learn how to PM lol
EDIT: nice pics btw. your truck looks nice and clean.
as for looking up a cap, if you want to, sure. i'm interested to know what would fit and look good. thanks. i'll look around a bit, too, between work and school
#73
Registered User
Join Date: Jul 2007
Location: Richmond va
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
#74
Registered User
Join Date: Jul 2007
Location: Richmond va
Posts: 739
Likes: 0
Received 0 Likes
on
0 Posts
Backgate,If you were anywhere around ramp 49 That was my truck, the Black on black and the white 4runner.http://img293.imageshack.us/i/topper008.jpg/
http://img709.imageshack.us/i/photo9dg.jpg/
http://img709.imageshack.us/i/photo9dg.jpg/
#77
Registered User
Join Date: Jul 2010
Location: Ontario, California
Posts: 195
Likes: 0
Received 0 Likes
on
0 Posts
Tom
#79
probably my second to last post here.
i went to the junkyard today and found an '87 (?) 4runner. while there was a lot of body damage, the "shell" was near perfect (i love the look of it). i tried fitting it on and, shocker, it fits. problem lies in the fact that the cab and rear windows are sloped and the shell is vertical. not only does it look odd, but i would need to make a valence to fill the gap. grrrr... so tonight i'll post pictures. i'm not getting it, though. just wanted to show you all that a 4runner "shell" WILL fit a short bed 93 ext cab pickup. if i had a regular cab, with the vertical cab end, i would probably get it. the guy wants $150 for it. the runner also has a nice bench seat and roll bar if anyone's looking. i just don't want it to go to waste.
soooo... whoever said "just get a 4runner" has the right idea for that kind if topper
i went to the junkyard today and found an '87 (?) 4runner. while there was a lot of body damage, the "shell" was near perfect (i love the look of it). i tried fitting it on and, shocker, it fits. problem lies in the fact that the cab and rear windows are sloped and the shell is vertical. not only does it look odd, but i would need to make a valence to fill the gap. grrrr... so tonight i'll post pictures. i'm not getting it, though. just wanted to show you all that a 4runner "shell" WILL fit a short bed 93 ext cab pickup. if i had a regular cab, with the vertical cab end, i would probably get it. the guy wants $150 for it. the runner also has a nice bench seat and roll bar if anyone's looking. i just don't want it to go to waste.
soooo... whoever said "just get a 4runner" has the right idea for that kind if topper
Thread
Thread Starter
Forum
Replies
Last Post
FS[PacNorWest]: 1982 Toyota Long Bed Trailer
58rennur4
Vehicles - Trailers (Complete)
2
08-04-2015 08:49 AM
DrZero
General Vehicle Related Topics (Non Year Related)
18
07-24-2015 11:31 PM
FS[NorAtl]: 1989 pickup beds and leer cap Rhode island
mickyd9990
Misc Stuff (Vehicle Related)
0
07-06-2015 09:01 AM