Trouble putting my 3.0 back together
#1
Registered User
Thread Starter
Join Date: Jun 2009
Location: Charlotte, NC
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Trouble putting my 3.0 back together
So I have rebuilt my 3.0 but when I went to start it back up I noticed that I have a plug that I can't find where it goes. Hopefully someone here can help me! I attached the picture to this thread.
#3
Registered User
The connector attaches near the coil and ignitor on the left fender, possibly under the air hose making it hard to see. The wire also bolts to the fender in the same area as a ground wire. The other end of the ground wire bolts to the left cylinder head on a boss above the #4 spark plug. In my photo the blue circle is where the cylinder head ground is and the red circles show the connector and ground on the fender.
Thread
Thread Starter
Forum
Replies
Last Post
aciorba23
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
1
06-29-2015 04:18 PM