3.0 coolant hose against firewall
#21
Registered User
Thread Starter
Join Date: Nov 2004
Location: So Cal & Yellowstone
Posts: 181
Likes: 0
Received 0 Likes
on
0 Posts
Well, I took the hood off. Its very easy! And that allowed good access.
Once the hood was off I was able to get to the little hose by laying on the engine and going at it with a 45* loooooong needle nose plyers. I replaced the old hose with some I had laying around. So I made an extra long loop so it wouldn't kink.
Runs great now! Thanks again everyone!
Once the hood was off I was able to get to the little hose by laying on the engine and going at it with a 45* loooooong needle nose plyers. I replaced the old hose with some I had laying around. So I made an extra long loop so it wouldn't kink.
Runs great now! Thanks again everyone!
Thread
Thread Starter
Forum
Replies
Last Post
the1998sr5
95.5-2004 Tacomas & 96-2002 4Runners
15
07-14-2020 08:35 PM
Poncho0206
95.5-2004 Tacomas & 96-2002 4Runners
3
07-10-2015 06:21 PM