.:Before:.




.:After:.








.:Extra Pics:.
Pic 1 Pic 2 Pic 3 Pic 4 Pic 5 Pic 6 Pic 7 Pic 8

.:Engine:.
-K&N FIPK
-Turbo Exhaust
-Ground Wire System (Read Post Below)

.:Exterior:.
-3" Performance Accessories Bodylift
-Energy Suspension poly Body Mount Bushings
-Bilstien Shocks
-32x11.50 BFG A/T KO on 15x10 Mickey Thompson Classic IIs
-OME Steering Stabilizer
-High Tone Horn
-Line-x Bedliner over the rails
-Poor Man's Truck Box W/ QD wing nuts
-Stull Chrome Round Tube Grille
-Fey Quad Tube Bumper

.:Interior:.
-Sr-5 Gauge Swap
-New Carpet From Auto Custom Carpets
-Rubber shift boots replaced with grey leather Pic 1 Pic 2
-Husky Liners
-Maglite Mod
-Fire Extinguisher mod

.:Stereo:.
-Kenwood 4011s (Had this radio so long I don't think I'll ever get rid of it)
-Kenwood 6 disc Cd Changer
-Pioneer 6 1/2" 3ways in the back
-Bazooka 5 1/4" 2ways in the doors (plan on replacing these they were just bought for the time being)

.:Stuff I've Replaced/Fixed:.
Center Radio Dash Piece & Added Pocket
Timing chain replaced
Front Windshield
Front Valence
Broken Taillight
Steering Wheel
Several Dash Pieces
E-brake Cable
Passenger Door Handle
A/C Controls
Heater Core & Fan
New clutch

.:Later:.
Ventshades
Bucket Seats and Console
Tint
Lots of other stuff, this is just the stuff I know I can acomplish.

.:Stuff Gathering:.
240watt Coustic amp
(2) 10" MTX Thunder 4000's
(2) 150hz bass blockers
(2) 300hz bass blockers
Pair of 5 1/4" Speaker Baffles


Please abide by the administration's rules of this section and DO NOT post in this thread

 

I'll have pics of all of the below as soon as I get my camera back and its not somewhat dark outside.

Updated Stuff Gathering and Exterior
-Stull Chrome Round Tube Grille
-Poor Man's Truck Box
On the way:
(2) 10" MTX Thunder 4000 - http://www.crutchfield.com/S-uIONh8L...sp?i=236T4104A
(2) 150hz Bass Blockers
(2) 300hz Bass Blockers - http://www.crutchfield.com/S-uIONh8L...p?i=127BB150A2
A Pair of 5 1/4 Slim Speaker Baffles - http://www.crutchfield.com/S-uIONh8L....asp?i=237XT52

Also I should pickup a FEY Black Powder Coated Quad Tube Bumper from Stuff For Trucks here in Louisville wednesday at the earliest. So all I have for now is a pic of the chrome bumper.

 

I just made my own Ground wire system with some 8 gauge power wire I had lying around and some connectors I bought on ebay (100 8gauge for 12-13 bucks). I know alot of you are all skeptical of them thinking that they don't do a thing. And for the most part I didn't feel any difference. The main thing it did though is smooth out my idle along with the engine just seems to run better. I grounded only about 6 spots at the moment, one because I was skeptical that it would do anything at all, and two I didn't have enough wire to do much else after using most of the 14ft I had to test it out on my friends civic.

My truck before the system had a bouncy idle when sitting in one spot. The truck now has a more solid idle, seems to be a little bit smoother running, I'd almost say a bit more responsive. The bouncing idle is the only reason why I did this mod the other stuff is just extra. Overall I would recommend this mod if your looking for something cheap to do. Kept me busy for a couple of days, One to measure the wires out and crimp and solder the connectors (I had other stuff to do that day and it was cold), the other day to put it on.

Cost:
8awg Wire = 0$ had
100 8gauge connectors= 12-13$ (Ebay)
(at the moment I only used 12 of them on my system)