YotaTech Forums
hub cover removed. on the spindle installed, you'd see the end of the stub axle and the "gold" 12mm bolt in the center here. remove the bolt.
hub cover removed. on the spindle installed, you'd see the end of the stub axle and the "gold" 12mm bolt in the center here. remove the bolt.
0 2022/06/26 11:47:11
so, i'm showing the "process" on some spare parts, because i didn't take pictures when doing the work...this is the locking hub cover, with the hub body below it
so, i'm showing the "process" on some spare parts, because i didn't take pictures when doing the work...this is the locking hub cover, with the hub body below it
0 2022/06/26 11:45:15
the locking hub cover and the six 6mm allen head bolts
the locking hub cover and the six 6mm allen head bolts
0 2022/06/26 11:44:37
0 2022/06/16 06:31:50
0 2022/06/16 06:31:38
0 2022/06/16 06:31:26
0 2022/06/16 06:31:05
0 2022/06/16 06:30:51
0 2022/06/16 06:30:26
will need to trim the bumper mounting tabs, too
will need to trim the bumper mounting tabs, too
0 2022/06/06 17:52:48
need to finish attaching the fenders to the tub
need to finish attaching the fenders to the tub
0 2022/06/06 17:51:59
still have a few things to attach
still have a few things to attach
0 2022/06/06 17:51:38
looks about right
looks about right
0 2022/06/06 17:51:26
0 2022/06/01 17:24:20
0 2022/06/01 17:23:35
0 2022/06/01 17:23:19
0 2022/05/15 08:03:25
0 2022/04/30 17:51:29
0 2022/04/30 17:51:21
0 2022/04/30 17:50:45
0 2022/04/30 17:50:35
0 2022/04/10 18:52:21
0 2022/04/10 18:51:24
0 2022/03/31 17:20:13
the sport buckets that i swapped into my '87, here in my '88 parts runner
the sport buckets that i swapped into my '87, here in my '88 parts runner
0 2022/03/31 17:14:43
the original buckets in my '87 4runner
the original buckets in my '87 4runner
0 2022/03/31 17:13:39
0 2022/03/14 17:06:33
from my "newer" '87
from my "newer" '87
0 2022/03/09 07:07:02
from my "older" '87
from my "older" '87
0 2022/03/09 07:06:19
back on the road
back on the road
0 2022/02/10 03:47:33
that’ll buff out, right?
that’ll buff out, right?
0 2022/02/10 03:46:33
pulled the old motor
pulled the old motor
0 2022/02/10 03:45:50
will need to adjust the mounting holes - the old frame was more bent/twisted, so the mounting locations on this excellent frame do not match the holes in the body. fortunately, fiberglass is easy to drill, and repair/fill.
will need to adjust the mounting holes - the old frame was more bent/twisted, so the mounting locations on this excellent frame do not match the holes in the body. fortunately, fiberglass is easy to drill, and repair/fill.
0 2021/11/15 08:14:46
sits a bit high
sits a bit high
0 2021/11/15 08:14:31
resting in place
resting in place
0 2021/11/15 08:14:16
a view from the back
a view from the back
0 2021/11/15 08:11:40
exhaust installed, and parking brake cables reattached to the frame
exhaust installed, and parking brake cables reattached to the frame
0 2021/11/15 08:11:24
opposite side
opposite side
0 2021/11/15 08:10:28
tranfer case crossmember installed
tranfer case crossmember installed
0 2021/11/15 08:10:10
0 2021/11/07 14:45:01