YotaTech Forums
dirty socket on driver in drill
dirty socket on driver in drill
0 2015/04/13 10:08:28
same socket after a quick spin around inside the scotchbright ah a 7/16 goes in with several others lol
same socket after a quick spin around inside the scotchbright ah a 7/16 goes in with several others lol
0 2015/04/13 10:08:22
plastic bag is full of metric sockets over 8lbs of them the std sockets are already mixed in with what i had previously
plastic bag is full of metric sockets over 8lbs of them the std sockets are already mixed in with what i had previously
0 2015/04/13 10:08:18
oiled scotchbright 1000 an 220 sand paper only using the sand paper if socket is really bad the 1000 actually makes them readable the scotchbright shines them up an applies some oil to them
oiled scotchbright 1000 an 220 sand paper only using the sand paper if socket is really bad the 1000 actually makes them readable the scotchbright shines them up an applies some oil to them
0 2015/04/13 10:08:11
just some of the stuff im cleaning up rust grime glue or who knows what makes it hard to identify the sockets an im gettin old
just some of the stuff im cleaning up rust grime glue or who knows what makes it hard to identify the sockets an im gettin old
0 2015/04/13 10:08:05
finally divided the area with a rail to keep my met an std sockets separated the added rail to the lid for the extensions an such me being OCD added the marine vinyl to the bottom to help tidy it up and its tough stuff going on my door pockets ... future post preview
finally divided the area with a rail to keep my met an std sockets separated the added rail to the lid for the extensions an such me being OCD added the marine vinyl to the bottom to help tidy it up and its tough stuff going on my door pockets ... future post preview
0 2015/04/13 10:07:59
package label
package label
0 2015/04/06 19:51:22
one of the bolts from my shackles it fell out of the side plate should have been a press fit
one of the bolts from my shackles it fell out of the side plate should have been a press fit
0 2015/04/06 19:50:38
my ground flux capacitor
my ground flux capacitor
0 2015/04/01 02:07:32
yay box with part...parts..no...part AGH!
yay box with part...parts..no...part AGH!
0 2015/03/27 14:44:28
certainly looks like it'll fit!
certainly looks like it'll fit!
0 2015/03/27 14:44:22
though not a green dragon by any means his blue eye is all me LOL
though not a green dragon by any means his blue eye is all me LOL
0 2015/03/26 15:12:18
passenger
passenger
0 2015/03/21 18:24:01
passenger
passenger
0 2015/03/21 18:23:51
drivers side
drivers side
0 2015/03/21 18:23:40
drivers side
drivers side
0 2015/03/21 18:23:17
wiped down before installing lubed the zipper with some silicone
wiped down before installing lubed the zipper with some silicone
0 2015/03/19 17:59:36
0 2015/03/19 17:59:27
same with this one once glued it wasn't visible from the other side
same with this one once glued it wasn't visible from the other side
0 2015/03/19 15:14:28
little wear through holes i patched them with cloth an adhesive no repair liquid as once glued they disappeared
little wear through holes i patched them with cloth an adhesive no repair liquid as once glued they disappeared
0 2015/03/19 15:14:21
applied repair liquid over spot
applied repair liquid over spot
0 2015/03/19 15:11:39
after heat set not too shabby an the repair is strong
after heat set not too shabby an the repair is strong
0 2015/03/19 15:11:31
about the middle of the cover 1in wear through spot reinforced with repair cloth
about the middle of the cover 1in wear through spot reinforced with repair cloth
0 2015/03/19 15:11:14
after vinyl repair liquid not too bad really no sign of the tear which would have run along the line of my mid finger from the inside heading towards the zipper
after vinyl repair liquid not too bad really no sign of the tear which would have run along the line of my mid finger from the inside heading towards the zipper
0 2015/03/19 15:11:08
back side at the tear the repair cloth about 3/8in past each side of the tear
back side at the tear the repair cloth about 3/8in past each side of the tear
0 2015/03/19 15:11:02
a rust dragon how apt
a rust dragon how apt
0 2015/03/13 19:57:39
0 2015/03/13 19:54:37
after adhesive setting for 24 hrs soild! would not pull up off underlayment
after adhesive setting for 24 hrs soild! would not pull up off underlayment
0 2015/03/10 15:48:10
0 2015/03/10 15:48:03
heating iron
heating iron
0 2015/03/10 15:47:57
first try at color matching i wiped this off an added a bit more black
first try at color matching i wiped this off an added a bit more black
0 2015/03/10 15:47:51
0 2015/03/10 15:47:47
cracks in dash had to add a hardener to the color mix an then put in cracks
cracks in dash had to add a hardener to the color mix an then put in cracks
0 2015/03/10 15:47:41
after application an heat the fibers are from wiping with paper towel
after application an heat the fibers are from wiping with paper towel
0 2015/03/10 15:47:34
repair begun has to sit 24 hrs for the adhesive to set an hold the torn parts i put the tape on to make sure it stays stuck to the cloth an is flat tomorrow i work with color vinyl an grain paper
repair begun has to sit 24 hrs for the adhesive to set an hold the torn parts i put the tape on to make sure it stays stuck to the cloth an is flat tomorrow i work with color vinyl an grain paper
0 2015/03/09 16:52:47
cotton fluff remains an vinyl repair glue that bonds the repair cloth to the rips
cotton fluff remains an vinyl repair glue that bonds the repair cloth to the rips
0 2015/03/09 16:52:40
repair kits
repair kits
0 2015/03/09 16:52:33
my tear with the repair kits backing material in there i needed to add some cotton fluff to pad the back so it would be level with the rest of the panel (cotton fluff acquired from old mattress going to the dump)
my tear with the repair kits backing material in there i needed to add some cotton fluff to pad the back so it would be level with the rest of the panel (cotton fluff acquired from old mattress going to the dump)
0 2015/03/09 16:52:26
cleaned seat
cleaned seat
0 2015/03/09 16:37:34
cleaned seat is quite soft an has a shine to the threads i think once repaired should be great
cleaned seat is quite soft an has a shine to the threads i think once repaired should be great
0 2015/03/09 16:36:50