YotaTech Forums
0 2019/06/17 05:58:09
0 2019/06/17 05:58:12
0 2019/06/17 05:58:15
0 2019/06/17 05:58:18
0 2019/06/17 05:58:21
0 2019/06/17 05:58:23
0 2019/06/17 05:58:26
0 2019/06/17 05:58:28
0 2019/06/17 05:58:31
powder coated wheels i didnt like,
powder coated wheels i didnt like,
0 2019/08/26 11:32:58
0 2019/08/26 11:33:04
new cleaned up wheels mounted
new cleaned up wheels mounted
0 2019/08/26 11:33:09
what i started with, yes the truck has much bigger issues than the wheels haha
what i started with, yes the truck has much bigger issues than the wheels haha
0 2019/08/26 11:33:16
0 2019/08/26 11:33:24
0 2019/08/26 11:33:30
0 2019/08/26 11:33:36
remove the ash tray (3 screws)
remove the ash tray (3 screws)
0 2019/08/29 09:54:30
remove these 2 screws
remove these 2 screws
0 2019/08/29 09:54:36
pull bezel straight out
pull bezel straight out
0 2019/08/29 09:54:41
the OEM outlet
the OEM outlet
0 2019/08/29 09:54:47
new outlet, i had to dremel a small amount out to fit it.
new outlet, i had to dremel a small amount out to fit it.
0 2019/08/29 09:54:52
sits nice and flush
sits nice and flush
0 2019/08/29 09:54:57
made up a quick pigtail / adaptor to run from the oem plugs to the new outlet
made up a quick pigtail / adaptor to run from the oem plugs to the new outlet
0 2019/08/29 09:55:02
back together
back together
0 2019/08/29 09:55:08
the light is on as long as the outlet is on, so you can keep the dust cover on it if the light bothers you.
the light is on as long as the outlet is on, so you can keep the dust cover on it if the light bothers you.
0 2019/08/29 09:55:13
if anyone cares, i did finish the windshield gasket too.
if anyone cares, i did finish the windshield gasket too.
0 2019/08/29 09:55:19
wire stays
wire stays
0 2019/09/06 05:47:02
wiper nozzles
wiper nozzles
0 2019/09/06 05:47:07
part number for the switch is 84160-90-K01
part number for the switch is 84160-90-K01
0 2019/09/06 05:47:13
loosen the two torque head screws on either side of the wheel, this will allow removal of the airbag.
loosen the two torque head screws on either side of the wheel, this will allow removal of the airbag.
0 2019/09/21 05:50:36
remove the two wires from the back of the airbag by pulling out of the yellow tabs, and pulling straight back on the connectors.
remove the two wires from the back of the airbag by pulling out of the yellow tabs, and pulling straight back on the connectors.
0 2019/09/21 05:50:42
this is a PN for the new ground wire. simply remove the existing wire, and replace it with the new one which has an extra wire for the control stick.
this is a PN for the new ground wire. simply remove the existing wire, and replace it with the new one which has an extra wire for the control stick.
0 2019/09/21 05:50:48
install the control stick like this
install the control stick like this
0 2019/09/21 05:50:54
these are the screws you will need, there are two
these are the screws you will need, there are two
0 2019/09/21 05:51:01
install the new bezel
install the new bezel
0 2019/09/21 05:51:07
this is the bezel PN
this is the bezel PN
0 2019/09/21 05:51:15
after installing the airbag, check to ensure your control stick works. bam, you have cruise control.
after installing the airbag, check to ensure your control stick works. bam, you have cruise control.
0 2019/09/21 05:51:20
this is the oem part number
this is the oem part number
0 2019/10/06 10:17:41
your 32 mm socket required for removal and installatin of the nut, which youll need to reuse.
your 32 mm socket required for removal and installatin of the nut, which youll need to reuse.
0 2019/10/06 10:17:47
my socket set is a 3/4 inch drive which makes removal pretty easy
my socket set is a 3/4 inch drive which makes removal pretty easy
0 2019/10/06 10:17:53