YotaTech Forums
pulled the old motor
pulled the old motor
0 2022/02/10 03:45:50
will need to adjust the mounting holes - the old frame was more bent/twisted, so the mounting locations on this excellent frame do not match the holes in the body. fortunately, fiberglass is easy to drill, and repair/fill.
will need to adjust the mounting holes - the old frame was more bent/twisted, so the mounting locations on this excellent frame do not match the holes in the body. fortunately, fiberglass is easy to drill, and repair/fill.
0 2021/11/15 08:14:46
sits a bit high
sits a bit high
0 2021/11/15 08:14:31
resting in place
resting in place
0 2021/11/15 08:14:16
a view from the back
a view from the back
0 2021/11/15 08:11:40
exhaust installed, and parking brake cables reattached to the frame
exhaust installed, and parking brake cables reattached to the frame
0 2021/11/15 08:11:24
opposite side
opposite side
0 2021/11/15 08:10:28
tranfer case crossmember installed
tranfer case crossmember installed
0 2021/11/15 08:10:10
0 2021/11/07 14:45:01
need to mount the transfer case crossmember next
need to mount the transfer case crossmember next
0 2021/11/01 17:05:58
a glimpse of the steering stabilizer
a glimpse of the steering stabilizer
0 2021/11/01 17:05:24
looks right at home
looks right at home
0 2021/11/01 17:04:42
the crane and transmission jack made this easier
the crane and transmission jack made this easier
0 2021/11/01 17:03:59
0 2021/11/01 17:02:39
0 2021/11/01 17:01:25
sitting on the crate for most of the last 8 years
sitting on the crate for most of the last 8 years
0 2021/11/01 17:00:13
strapped to the jack; ready for the engine now!
strapped to the jack; ready for the engine now!
0 2021/11/01 16:58:49
crane makes it easy to set the unit on the transmission jack
crane makes it easy to set the unit on the transmission jack
0 2021/11/01 16:58:36
ties the bumper into the frame really well
ties the bumper into the frame really well
0 2021/11/01 16:54:47
friend made the bumper for me years ago (traded some maple syrup for it).
friend made the bumper for me years ago (traded some maple syrup for it).
0 2021/11/01 16:54:36
0 2021/11/01 16:52:42
0 2021/11/01 16:52:24
new calipers, too!
new calipers, too!
0 2021/10/12 18:36:04
shiny!
shiny!
0 2021/10/12 18:35:45
0 2021/10/12 18:21:35
0 2021/10/12 18:21:17
0 2021/10/12 18:21:07
0 2021/10/12 18:20:55
0 2021/10/12 18:20:46
still have a few loose ends with the suspension to take care of, but it's closer
still have a few loose ends with the suspension to take care of, but it's closer
0 2021/10/03 16:58:31
first time it has been "rolled" since 2013
first time it has been "rolled" since 2013
0 2021/10/03 16:58:23
axles under it, too
axles under it, too
0 2021/10/03 16:58:14
0 2021/10/03 16:40:47
0 2021/10/03 16:40:36
0 2021/10/03 16:40:20
and thicker than the frame itself
and thicker than the frame itself
0 2021/09/24 16:33:14
solid mounting
solid mounting
0 2021/09/24 16:32:36
so that the rocky road hardware would have someting to attach to/locate off of
so that the rocky road hardware would have someting to attach to/locate off of
0 2021/09/24 16:31:49
and then trim them/drill them
and then trim them/drill them
0 2021/09/24 16:31:04
i had to add storck hangers
i had to add storck hangers
0 2021/09/24 16:30:39