YotaTech Forums
0 2016/04/05 19:56:24
0 2016/04/05 19:57:38
0 2016/04/05 19:58:08
0 2016/04/05 19:58:49
0 2016/04/05 20:00:17
0 2016/04/05 20:00:49
0 2016/04/05 20:01:22
0 2016/04/05 20:02:12
0 2016/04/05 20:03:16
0 2016/04/05 20:04:02
0 2016/04/06 11:43:44
0 2016/04/10 00:56:02
0 2016/04/10 01:00:39
0 2016/04/10 01:13:21
0 2016/04/10 01:14:43
0 2016/04/10 10:19:43
0 2016/04/10 10:20:48
^^^Here is a before pic, you can see the way i cut the frame and welded it back together left the hinge in the original location. I cut the leice of square tube and moved the hinge in more.
^^^Here is a before pic, you can see the way i cut the frame and welded it back together left the hinge in the original location. I cut the leice of square tube and moved the hinge in more.
0 2016/04/11 18:32:09
Here is the hinge after moving it in 4 or 5 inches.The floor contours in right where the hinge bolts to the floor, so i made a 1/4" thick spacer and welded to the hinge. The spacer was wide enough that I was able to use th seatbelt hole to bolt it dowm.
Here is the hinge after moving it in 4 or 5 inches.The floor contours in right where the hinge bolts to the floor, so i made a 1/4" thick spacer and welded to the hinge. The spacer was wide enough that I was able to use th seatbelt hole to bolt it dowm.
0 2016/04/11 18:35:10
^^^Here is the seat bottom. I welded in a peice of flatbar.
^^^Here is the seat bottom. I welded in a peice of flatbar.
0 2016/04/11 18:50:41
^^^Then i cut the frame and slide the spring over to center them.
^^^Then i cut the frame and slide the spring over to center them.
0 2016/04/11 18:51:15
Side by side comparison. The durango seat bottom on the left and the modified 4Runner frame on the right.
Side by side comparison. The durango seat bottom on the left and the modified 4Runner frame on the right.
0 2016/04/11 18:53:13
^^^And finally some pics of the foam and cover on the newly modified 4runner seat bottom frame.
^^^And finally some pics of the foam and cover on the newly modified 4runner seat bottom frame.
0 2016/04/11 18:55:52
The way the durango seat foam is shaped, the seat backs slope back a little more than the originals, same with the seat bottoms. I dont think it looks too bad, and they are really comfortable.
The way the durango seat foam is shaped, the seat backs slope back a little more than the originals, same with the seat bottoms. I dont think it looks too bad, and they are really comfortable.
0 2016/04/11 18:57:45
My back window stops working at the worse possible times. I was in a hurry, needed it up, already had the switch out so I jumpered across and it works with the key on...assuming it bypasses all the safty switches? Dont know, but works in a pinch!
My back window stops working at the worse possible times. I was in a hurry, needed it up, already had the switch out so I jumpered across and it works with the key on...assuming it bypasses all the safty switches? Dont know, but works in a pinch!
0 2016/04/12 16:49:45
0 2016/04/12 18:06:36
0 2016/04/13 16:07:36
0 2016/04/13 16:08:23
0 2016/04/13 16:08:48
0 2016/04/13 16:09:08
0 2016/04/13 17:10:11
0 2016/04/18 15:08:03
0 2016/04/18 15:08:44
0 2016/04/18 15:09:13
0 2016/04/18 15:09:45
0 2016/04/18 15:10:37
0 2016/04/18 15:11:08
0 2016/04/18 15:11:53
0 2016/04/18 18:25:05
0 2016/04/18 18:28:00