My Post Pictures

October 14, 2015

58

0

kit provided these 5"x2" plates to weld into the hole on the motor mount when you remove the IFS brackets

kit provided these 5"x2" plates to weld into the hole on the motor mount when you remove the IFS brackets

0 2017/05/04 09:17:55 bruno4turb

The kit also included an axle "rebuild" kit, wheel bearings, steering bearings, all the seals, new rotors, and a 3/8" plate you have to weld to the driver side spring pad.

The kit also included an axle "rebuild" kit, wheel bearings, steering bearings, all the seals, new rotors, and a 3/8" plate you have to weld to the driver side spring pad.

0 2017/05/04 09:18:11 bruno4turb

Kit also came with high steer cross over steering

Kit also came with high steer cross over steering

0 2017/05/04 09:18:25 bruno4turb

had to set whole vehicle weight on the springs to check for correct shackle angle

had to set whole vehicle weight on the springs to check for correct shackle angle

0 2017/05/04 09:18:43 bruno4turb

need and alighment but other wise turbo is road ready!

need and alighment but other wise turbo is road ready!

0 2017/05/04 09:18:56 bruno4turb

0 2018/05/24 15:43:54 bruno4turb

Torch off brackets

Torch off brackets

0 2018/05/24 15:43:56 bruno4turb

0 2018/05/24 15:43:58 bruno4turb

plate for engine mount provided

plate for engine mount provided

0 2018/05/24 15:44:00 bruno4turb

Sorry no photos of rebuilding front axle, just followed Lowrangeoffroad's youtube tutorials

Sorry no photos of rebuilding front axle, just followed Lowrangeoffroad's youtube tutorials

0 2018/05/24 15:44:02 bruno4turb

loosly bolt everything in

loosly bolt everything in

0 2018/05/24 15:44:04 bruno4turb

set up steering

set up steering

0 2018/05/24 15:44:05 bruno4turb

check ride height and shackle angle

check ride height and shackle angle

0 2018/05/24 15:44:07 bruno4turb

check my build thread for the flat bed, and sas on turbo here

check my build thread for the flat bed, and sas on turbo here

0 2018/05/24 15:59:23 bruno4turb

(recently put a cage on the green, and painted it red)

(recently put a cage on the green, and painted it red)

0 2018/05/24 15:59:24 bruno4turb

0 2018/05/30 09:17:13 bruno4turb

0 2018/05/30 09:17:29 bruno4turb

0 2018/05/30 09:17:55 bruno4turb

Page
2 of 2

Go To
Page

Go to page of 2 pages

1
2