YotaTech Forums
Red 12ga will go to a + busbar and leads into the fuses, then to the relays. Black (with red stripe) 12ga will go to a grounding busbar. Colorful spools will be run through the firewall to the switches with other wiring going to the interior.
Red 12ga will go to a + busbar and leads into the fuses, then to the relays. Black (with red stripe) 12ga will go to a grounding busbar. Colorful spools will be run through the firewall to the switches with other wiring going to the interior.
0 2016/06/10 07:40:25
view from the top. Many of the holes are plugged as each relay takes up 6 positions, but only uses 4. Top right you can see a micro II 35A SPST relay installed. Great little system using Metri-pack
view from the top. Many of the holes are plugged as each relay takes up 6 positions, but only uses 4. Top right you can see a micro II 35A SPST relay installed. Great little system using Metri-pack
0 2016/06/10 07:40:15
0 2016/06/08 08:44:41
0 2016/06/08 08:44:34
0 2016/06/07 08:33:07
0 2016/06/07 08:28:55
0 2016/06/07 08:28:30
support bracket (ugly as sin, but I didn't even weld it....just grabbed it out of the scrap bin at the shop)
support bracket (ugly as sin, but I didn't even weld it....just grabbed it out of the scrap bin at the shop)
0 2016/06/07 07:49:38
National Luna setup and 2 mega fuses mounted to the back - will get better pictures of that later
National Luna setup and 2 mega fuses mounted to the back - will get better pictures of that later
0 2016/06/07 07:49:36
0 2016/06/07 07:49:35
why I had to modify the headlight wiring and cheat it forward
why I had to modify the headlight wiring and cheat it forward
0 2016/06/07 07:49:33
0 2016/06/07 07:49:32
TIGHT fit!
TIGHT fit!
0 2016/06/07 07:49:30
needs a logo or sticker on top
needs a logo or sticker on top
0 2016/06/07 07:49:28
support bracket (i just grabbed out of the scrap pile at the shop.....it works, just isn't pretty.
support bracket (i just grabbed out of the scrap pile at the shop.....it works, just isn't pretty.
0 2016/06/07 07:45:12
you can kind of see the National Luna system and Mega fuses bolted to the back upright, but I'll try and get some better pictures later
you can kind of see the National Luna system and Mega fuses bolted to the back upright, but I'll try and get some better pictures later
0 2016/06/07 07:45:10
0 2016/06/07 07:45:09
now you see why I had to modify the headlight wiring and remove the 1" plug as well as cheat it forward with the rubber hose spacers....TIGHT!
now you see why I had to modify the headlight wiring and remove the 1" plug as well as cheat it forward with the rubber hose spacers....TIGHT!
0 2016/06/07 07:45:07
6mm stud to the left, countersunk stainless hardware on the bottom
6mm stud to the left, countersunk stainless hardware on the bottom
0 2016/06/07 07:45:06
you can definitely see how tight of a fit it was
you can definitely see how tight of a fit it was
0 2016/06/07 07:45:04
will probably toss a "toyota" logo (from the junkyard) or a rising flag TEQ sticker on the top part just for kicks
will probably toss a "toyota" logo (from the junkyard) or a rising flag TEQ sticker on the top part just for kicks
0 2016/06/07 07:45:02
support bracket (this was just something I grabbed out of the scrap pile. I didn't do those terrible looking welds, but it was late and it works (and won't be seen)
support bracket (this was just something I grabbed out of the scrap pile. I didn't do those terrible looking welds, but it was late and it works (and won't be seen)
0 2016/06/07 07:40:31
You can slightly see the national luna setup with two AMG Mega fuses bolted to the back upright, but I'll try to get some better pictures of it later
You can slightly see the national luna setup with two AMG Mega fuses bolted to the back upright, but I'll try to get some better pictures of it later
0 2016/06/07 07:40:29
You can see why I had to modify the headlight plug and move it forward slightly
You can see why I had to modify the headlight plug and move it forward slightly
0 2016/06/07 07:40:27
welded 6mm studs to the right (will probably get wingnuts for ease of removal) and countersunk bolts holding it down to the support bracket (shown later)
welded 6mm studs to the right (will probably get wingnuts for ease of removal) and countersunk bolts holding it down to the support bracket (shown later)
0 2016/06/07 07:40:26
Pretty darn tight fit
Pretty darn tight fit
0 2016/06/07 07:40:24
I may put a "Toyota" logo over the flat part of the top, or at least a TEQ Rising sun sticker or something
I may put a "Toyota" logo over the flat part of the top, or at least a TEQ Rising sun sticker or something
0 2016/06/07 07:40:23
0 2016/06/07 07:03:06
0 2016/06/07 07:03:05
hopefully where my dual battery tray will go.....note the lowered power steering cooler to the left
hopefully where my dual battery tray will go.....note the lowered power steering cooler to the left
0 2016/06/07 06:58:17
had to nix the plug on the back for extra room
had to nix the plug on the back for extra room
0 2016/06/07 06:58:15
rubber hose to move the headlight forward slightly
rubber hose to move the headlight forward slightly
0 2016/06/07 06:58:13
Extended MAF / AFM wiring
Extended MAF / AFM wiring
0 2016/06/07 06:56:05
simple 90 degree 3" spectre elbow from Pep boys and extended MAF / AFM wiring to that location.
simple 90 degree 3" spectre elbow from Pep boys and extended MAF / AFM wiring to that location.
0 2016/06/07 06:56:03
0 2016/06/03 10:20:24
0 2016/06/03 10:20:22
0 2016/05/23 14:13:45
Removed a little material for it to fit in between the stock bracket
Removed a little material for it to fit in between the stock bracket
0 2016/05/23 14:13:38
0 2016/05/23 14:13:32
Same factory plug in the back, and larger stud and different orientation for the main
Same factory plug in the back, and larger stud and different orientation for the main
0 2016/05/23 14:13:26