YotaTech Forums
0 2015/03/22 23:00:42
0 2015/03/23 13:24:59
0 2015/03/26 08:21:06
0 2015/07/20 08:15:18
0 2015/07/20 08:17:26
0 2015/07/20 08:46:25
Cut the valence.
Cut the valence.
0 2016/01/11 09:46:36
I like it. Although, something still seems odd on the overall look. I think too much chrome. That will change soon enough :)
I like it. Although, something still seems odd on the overall look. I think too much chrome. That will change soon enough :)
0 2016/01/11 09:46:38
Set about 1-inch back.
Set about 1-inch back.
0 2016/01/11 09:46:39
Ready to be fully welded
Ready to be fully welded
0 2016/01/11 09:51:39
Primed
Primed
0 2016/01/11 09:51:41
Regular headlights.
Regular headlights.
0 2016/01/11 23:37:44
0 2016/01/11 23:38:31
0 2016/01/20 20:53:04
0 2016/01/24 09:42:43
0 2016/07/04 16:53:44
1 2016/07/04 16:54:06
after
after
0 2016/07/04 21:53:38
before.
before.
0 2016/07/04 21:53:44
My Son!
My Son!
0 2016/07/05 11:25:56
Don't want to have ugly stock parts and guts hanging out from below or elsewhere, so started chopping stuff. Will do more chopping, maybe some sheet metal to cover things up later.
Don't want to have ugly stock parts and guts hanging out from below or elsewhere, so started chopping stuff. Will do more chopping, maybe some sheet metal to cover things up later.
0 2016/07/08 17:04:18
Primed and 1st coat of paint
Primed and 1st coat of paint
0 2016/07/08 17:04:21
bumper off. Need new place to mount light bar.
bumper off. Need new place to mount light bar.
0 2016/07/08 17:04:25
0 2016/07/09 00:04:03
0 2016/07/09 00:38:28
Expanded metal painted and bumper installed.
Expanded metal painted and bumper installed.
0 2016/07/09 07:28:31
0 2016/07/09 07:28:34
0 2016/07/09 07:40:23
Finally, getting closer to the look I imagined for it 3 years ago :D
Finally, getting closer to the look I imagined for it 3 years ago :D
0 2016/07/09 13:24:55
0 2016/07/09 13:25:01
I'm not a very patient or good fabricator. But I am pleased with my work on this.
I'm not a very patient or good fabricator. But I am pleased with my work on this.
0 2016/07/09 13:25:04
Inside for testing. Very nice tight fit.
Inside for testing. Very nice tight fit.
0 2016/07/19 08:30:01
All springs and pins went on easily, no issues that I can think of which would cause me to suspect a cause of the tight ratcheting.
All springs and pins went on easily, no issues that I can think of which would cause me to suspect a cause of the tight ratcheting.
0 2016/07/19 08:30:05
At .152 I am within spec of .145 to .17
At .152 I am within spec of .145 to .17
0 2016/07/19 08:30:08
at .009 I am within spec of .006 to .020.
at .009 I am within spec of .006 to .020.
0 2016/07/19 08:30:10
0 2016/07/19 08:30:12
the new 4.88 front Diff comes out of hiding and gets gutted and cleaned.
the new 4.88 front Diff comes out of hiding and gets gutted and cleaned.
0 2016/07/19 09:11:56
Locker installed, pretty easy, everything fit just right.
Locker installed, pretty easy, everything fit just right.
0 2016/07/19 09:11:58
Covered and sealed, ready to be installed.
Covered and sealed, ready to be installed.
0 2016/07/19 09:11:59
Time for the rear. I had done some temporary oil leak pluggage :D
Time for the rear. I had done some temporary oil leak pluggage :D
0 2016/07/19 09:12:01