How do I take off the rotors on my 1994 4x4 truck? The one on the right side is in bad shape, It has a crack in it. I have replaced the brake pads on the left and it looked good, when I pulled off the wheel on the Rt it was bad, got to get the rotor off and get another one, Thanks for the help, Sue

 

Follow these instructions to remove the hub, and after you get it off you'll find 6 bolts at the back which need to be removed to seperate the rotor from the hub. They'll be very tight, when I did mine I put the hub into a wheel lying on the ground, stood on it and used a 24" breaker bar.

http://www.off-road.com/toyota/wheel_bearing.html

It's a big job, and you'll want to at least repack the wheel bearings, or replace them if they're worn.

 

Thank you, about how much do they cost?

 

It's been a while since I replaced mine, but I'd guess around $60 - $70 each.

 

LCE has some drilled and vented rotors for $44 ea, I think

 

go with the LC rotors...i have them and they stop on a dime!!! i love them!!

 

i have power slot rotors on my truck and there awesome i think i paid around $240 for the 2 rotors and pads

 

will a 1988 4x4 rotor work on my 1994 truck. I got the rotor off today and a guy down the road has a 1988 4x4 wrecked truck that I can get the rotors for a song, If not what number do I order from LCE. I have a 1994 extend cab 4x4 with manual locking hubs. I don't think it is a Tomcma