Hi, I have all of this posted in the axles/tires/wheels section and finally realized half of what I'm selling doesn't belong there. I didn't delete it, but I am reposting the miscellaneous stuff here for your viewing pleasure

~2001-2004 Tacoma Front console and boot~item was returned to Toyota of Dallas

~ABS items from a 94 4Runner w/ rear ABS I no longer have ABS, so anything that doesn't affect actual braking (or the speed sensor) is up for grabs. I guess this basically leaves the relay, computer and some wiring. The ABS computer/control module is very expensive. It costs over $200 new and anywhere from $50-150 used. I will need to get the P/N for anyone interested in this part as I have not checked yet. But for reference, my vehicle is a 94 4Runner 5spd, V6 with cruise control 31" stock tires, 4:56 gears and rear ABS. The relay runs about $30ish new. Price-best offer under $75 for both will seperate.

~I also have one right side stock turn signal, one stock left side park lamp with a very small crack on the inside, one clear passenger's side park lamp and a set of OEM headlights All items are off of a 94 and/or a 95 4Runner. The OEM headlights are a bit foggy, but can be buffed out easily. I was just too lazy and got a good deal on a new set so I didn't bother. Price- $5-$50 ranging from one lamp to all of them.
headlamps~ $25ea/$40 pr.
right side turn signal~ $10
left side park lamp~ $5
left clear park lamp~ $5
EDIT- There was a crack found in the OEM park lamp and the left side turn signal isn't usable as I didn't realize the screw had pulled through it in addition to a small chip. I also just realized the clear park lamp was "wallowed" out to accept a dual filament bulb and connector. So I guess the headlights and the right side turn signal are the only ones without any blemishes. If these don't sell I'll probably buff them out and e-bay 'em.


Updated Pictures-





~stock "premium" stereo amp and speaker pods I have the stock amp (that goes behind the head unit as well as the rear speaker boxes that I no longer need. $10 for the speaker pods and $15 for the amp....$20 for all.

~stock 31" under vehicle tire carrier Still on my vehicle, but I have no use for it. I will need to keep the tools used to lower the tire as I'm still using my stock bottle jack :shaking: Price- $25 ~Sale pending on mechanism iitself.

~rear chrome bumper The driver's side piece is showing rust in one spot on the outside and has quite a bit of surface rust on the inside. The passenger's side is very nice on the outside and shows only a small amount of surface rust on the inside. The black is a little faded on the top for the center. The center piece itself is showing no rust on the outside but does have a decent amount of surface rust on the inside. Price~
driver's side - $10
pass side - $20
Center with black moulding - $20

~Immaculate Rear Seat Headrests I'll let the pics speak for themselves. They're off a 94 4Runner. No blemishes at all. Anything showing up in the pic is from where I handled them to take a pic. Price- $20/ea or $35 for the set


Thanks for looking! Hopefully these items will get more exposure here than in the wrong forum

If not mentioned previously, all items are OBO within reason and prices do not include shipping



Rusty

 

Is there any way I could get a picture of the back of the headlights sent to jddement1s@semo.edu , also how much for them shipped to 63755, a business address. Thanks.

 

Sure, I'll take a pic, get a rough estimate on shipping, then get back to you. I still have the 2 metal brackets that attach from the light to the frame, but took them off before I looked and saw the new ones had them LoL

FYI, to keep them safe I'll be shipping them in the 2 boxes that my newer lights came in.


Thanks!

 

If you want the "Holy ˟˟˟˟˟ those don't even fit on my screen!" version of the pictures I can still send those to your e-mail.

HTH

~R

 

INterested in driver's side rear bumper end. Can you take a picture so I can see the condition?

 

Yeah....about that. I need to update the thread after getting under my vehicle today...or just do this~ The outside on both the driver's side and middle bumper look fine with no dings....but once I got under the vehicle I noticed there was surface rust on all of it.

Having that said, I can still get you a pic if you want...but my guess is no.

Thanks for your interest!

Rusty

 

Depends on how bad the rust is. Fixable do you think with a quick sanding and some ruststopper? Mine is dented, so it would be nice with a non-dented one.

 

Sorry I couldn't get you a pic before dark, but I checked it again and the outside is nice and straight...it looks really good actually. The inside isn't all that bad, the rust is just now starting and could easily be stopped if you wanted to.

The only problem I forsee is that you're across the country from me, so shipping may be a fair bit because of the size and shape of it. I can get you a rough estimate if you're interested.

Thanks!

~R

 

Hey, I forgot about getting you a shipping quote, are you still interested in the lights? I'll get a quote and edit this post to reflect it.

EDIT I got a quote of roughly $20-25 for shipping

 

I'm interested in the pair of turn signals. The $15, does that include shipping?

 

I hadn't intended it to include shipping, but I found a very small chip on one of them last night. If you're still interested I'll give you a at better picture of the chip and the price would be $15 shipped. IIRC, the chip is so small that it doesn't protrude over to the lens portion itself. I had them 3 feet away from me and didn't notice it until I picked it up.

BTW, it's not of much consequence, but I believe these still have the bulbs in them as well.

Thanks for your interest!

Rusty

 

Rusty, yes, please do give me a better picture of the chip.

 

Hey, I could've swore that I had 1 good park lamp and a pair of good turn signals, but apparently I only have one good signal. I had to replace both the turn signals and park lamps on my vehicle and my grandmother's but they were hit on opposite sides and I thought I kept the good ones from each side...but apparently I either lost mine or threw them away....I updated the first post to reflect my findings.

The chip was very minor, but while I was holding it I realized that one of the screws had been pulled all the way through the back side.

Sorry for the mistake

~R

 

No problem. Thanks for the update.