All parts are in, the SS 3.0 in Frankenstrut.
Jul 12, 2004 | 11:27 PM
#1
Thread Starter
Registered User
Joined: Jul 2003
Posts: 392
Likes: 0
From: Hawaiian Islands
All parts are in, the SS 3.0 in Frankenstrut.
Finally got all my parts in to build my 3" Frankenstrut. I will get some pics up tomorrow. So off comes the SAW, time to try something new. 
Jul 13, 2004 | 07:47 AM
#3
Thread Starter
Registered User
Joined: Jul 2003
Posts: 392
Likes: 0
From: Hawaiian Islands
OME N91S shock
Y2K Stock coil
Stock rubber isolator and upper retainer
Cornfed 2.5in front lift
Revtek top out spacer
Basically the same as Steve Schaefer kit but with the 2.5 in Cornfed instead of the 1.5 in kit.
Y2K Stock coil
Stock rubber isolator and upper retainer
Cornfed 2.5in front lift
Revtek top out spacer
Basically the same as Steve Schaefer kit but with the 2.5 in Cornfed instead of the 1.5 in kit.
Jul 13, 2004 | 09:21 AM
#5
Thread Starter
Registered User
Joined: Jul 2003
Posts: 392
Likes: 0
From: Hawaiian Islands
I`ll be drilling out the retainer today at work and will put it all together on Saturday or Sunday. On the stock Toy isolator ring funny thing is it cost me about $80. and I can use is the rubber part and not the metal ring itself. It conflicts with the Cornfed spacer.
Thread
Thread Starter
Forum
Replies
Last Post
XtraCab
Solid Axle Swaps, All Years
18
Apr 12, 2020 05:25 AM
ZONAYODA
86-95 Trucks & 4Runners
12
Jul 13, 2015 07:17 PM
