BG 44K into intake??
#1
BG 44K into intake??
I was perusing the 4x4wire.com board and came across a thread where some guy did sort of the SeaFoam thing, but with a can of BG 44K through the intake and it worked quite well. Anyhoo, any of you folks tried this yet and any consequences of this?
http://www.4x4wire.com/forums/showfl...t=1#Post527961
http://www.4x4wire.com/forums/showfl...t=1#Post527961
Last edited by humanoid; May 26, 2004 at 07:36 AM.
#3
Originally Posted by humanoid
I was perusing the 4x4wire.com board and came across a thread where some guy did sort of the SeaFoam thing, but with a can of BG 44K through the intake and it worked quite well.

I posted what my experience was with seafoam on this board, in this thread. I still wouldn't eject into my intake, that would kinda scare me to do that, you really could snap a connecting rod when you hydrolock the car. besides seafoam is only $6.99 @ Napa, and BG 44k I got for like $20 something a can.
#4
I've wondered about doing the same with BG 44K instead. I thought of this after reading Mohamed's post on the Seafoam. I would like to try it on my 84 Camry to see if it would help it run even better. I used a can of the BG 44K in the tank and it idles much better, but I would like to run some cleaner through the brake booster line like Mohamed and see if it would help some more.
If I do it, I will probably just get a can of the Seafoam since it is about $6.00 here and save my two cans of pricey BG 44K for the gas tank.
If I do it, I will probably just get a can of the Seafoam since it is about $6.00 here and save my two cans of pricey BG 44K for the gas tank.
Thread
Thread Starter
Forum
Replies
Last Post
kawazx636
The Classifieds GraveYard
34
Oct 6, 2021 03:03 PM
LittleUgly
86-95 Trucks & 4Runners (Build-Up Section)
15
Jan 2, 2020 01:30 PM




