2000 4runner Spark gap for Nippon says .041
Nov 7, 2002 | 10:08 AM
#1
Thread Starter
Registered User
Joined: Nov 2002
Posts: 9
Likes: 0
2000 4runner Spark gap for Nippon says .041
I just purchased from Toyota Dealer the 4runner spark plugs, does anyone know if they come pre-gapped. The manual says .041, and I noticed they are a bit tight. So I adjusted, and installed, and I just want to know if their correct?
Nov 8, 2002 | 12:36 AM
#2
Registered User
Joined: Nov 2002
Posts: 569
Likes: 2
From: Beaverton, OR
Hello
0.38 - 0.44, would the daily driver know the difference? I dont think so.
You found the spec to be 0.41? If you believe that info to be accurate, by all means check the plugs. Adjust them as necessary.
Word of caution, gapping platnium tip plugs can scrape the platnium off.
Jay
0.38 - 0.44, would the daily driver know the difference? I dont think so.
You found the spec to be 0.41? If you believe that info to be accurate, by all means check the plugs. Adjust them as necessary.
Word of caution, gapping platnium tip plugs can scrape the platnium off.
Jay
Nov 8, 2002 | 06:23 AM
#3
Thread Starter
Registered User
Joined: Nov 2002
Posts: 9
Likes: 0
thanks...was just wondering how it would affect gas mileage, to the driver, seems to be about the same...?
Thread
Thread Starter
Forum
Replies
Last Post
sandyota
84-85 Trucks & 4Runners
18
Feb 4, 2021 11:16 AM
Avenged
95.5-2004 Tacomas & 96-2002 4Runners
4
Jul 9, 2015 07:55 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 6, 2015 01:20 PM
