When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 1991 LH85 Hiace with a 2L diesel, 8" rear axle and IFS front end. From what I can see it is almost identical to a pickup/hilux/4runner although the upper arms are different (I know this because I pieced all the parts together to lift it almost 2 years ago and the balljoint design differs from a pickup so I couldn't use the spacers I had purchased).
Does anybody know of EITHER some replacement torsion bars, or torsion bar keys I could swap out to get approximately 1.5" of lift? I cranked the bars ages back so I could run my 31x10.5R15 tyres and i'm finally getting around to doing it somewhat properly without going stupid high. I could solid-axle-swap this but i'm trying to keep it as simple as possible as I really don't have the time to be fabricating the required stuff and messing with the steering box to solid axle swap it unfortunately.
04-04-2023, 08:50 AM
