1 Banjo bolt for fuel line (though, I've never seen a plated one before),
4 Wire loom holders, in-board of two valve covers,
8 Exhaust manifold shield(I believe it is the drivers' side)
9 Shield on apron that holds flexible tire splash guard (passenger side) "PATCH, APRON. PATCH, FENDER APR. Side EXTENSION. (Front)"
11 Strut that holds up plenum, passenger side. "OBS. Stay, Surge Tank, NO."

5 May be radiator supports

 

Thanks the help!!!

 

I’m down to #6 and #11. Still can’t find where these go any help is much appreciated!!

 

Isn't #6 the rubber boot for the clutch fork??

 

First, if you've identified the rest of the parts, you really should post here what they are. Sorta payin' it forward.

Next, I told what I thought #11 was, with a link to a Toyota drawing showing (exactly) where it goes. Do you disagree?

I'm less sure about #6, but it's probably the Boot, Clutch Release. https://parts.lakelandtoyota.com/p/_...112620060.html Again, look at the drawing; if that's not it, tell us why.

[As is so often the case, millball beat me to #6.]

 

Edit sorry #6 is the clutch fork boot! Thanks
#2 is what I’m looking for still......🙏🙏
#11 is indeed the bracket that supports the plenum from the egr valve to the head. 👍🏼